REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont'd)
e. Check to see that steel balls are properly positioned in upper body and then remove them from upper body.
INSPECTION Lower and upper bodies @ Check to see that there are pins and retainer plates in lower body.
SATO72ZA @ Check to see that there are pins and retainer plates in upper body. @ Be careful not to lose these parts.
SATE734 @ Check to make sure that oil circuits are clean and free from Yrube bracket Tube damage. connector @ Check tube brackets and tube connectors for damage.
Separator plates @ Check to make sure that separator plate is free of damage and not deformed and oil holes are clean.
SAT675A
AT-98
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.