Disassembly (Cont'd) - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › Disassembly (Cont'd) - Nissan 180SX S13 Workshop Manual
Disassembly (Cont'd)
i DISASSEMBLY a
Disassembly (Cont'd)
6. Check oil pan and oil strainer for accumulation of foreign
particles.
If materials of clutch facing are found, clutch plates may be
@ worn, if metal filings are found, clutch plates, brake bands, etc. @ may be worn. (|f aluminum filings are found, bushings or aluminum cast @ parts may be worn. In above cases, replace torque converter and check unit for cause of particle accumulation. SATI718 Remove lock-up solenoid and fluid temperature sensor
7. connectors. Be careful not to damage connector. @ 1 >. ; Connectors
Blade tp of / 4
screwdriver
8. Remove oil strainer. Remove oil strainer from control valve assembly.
a. Then remove O-ring from oil strainer.
b. Check oil strainer screen for damage.
SATO25B Remove control valve assembly.
9.
Syo! N |
Straighten terminal clips to free terminal cords then remove
a. terminal clips.
“i __T satooge AT-81
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.