REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont'd)
—
f. Temporarily assemble lower and upper bodies, using reamer Reamer bolt —> bolt as a guide. v Reamer bolt / @ Be careful not to dislocate or drop steel balls, orifice im f check spring, orifice check valve and pilot filter. yh
g. Install and temporarily tighten bolts and tube brackets in their proper locations. Bolt length and location: Bolt alt symbol a b C d Item 70 50 33 27 Bolt omens length
mm (in)
(2.76) | (1.97) | (1.30) | (1.06)
2. Install solenoids.
a. Attach O-ring and install lock-up solenoid and side plates onto lower body.
1 IT I ee ee
woe
ijt ale i vf an
b. Attach O-rings and install 3-unit solenoids assembly
upper body.
oO onto bh 2 49) AT g y |
/ Overrun clutch solenoid
c. Attach O-ring and install line pressure solenoid onto upper body.
3. Tighten all bolts.
q SATEB7A
AT-101
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.