REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Low & Reverse Brake
For the number of clutch sheets (drive plate and driven plate), refer to the below cross-section. Needle bearing rn ® Low & reverse brake piston Low oneway | D-ring G4 ATP clutch inner race Spring | it'sion . i pt al ' Snap ring retainer y | Retaining plate ¥ i if Driven plate
| oere
| | | I Return spring |
fo) 21-26 N-m (2,1 - 2.7 kg-m, 15 - 20 ft-Ib) Drive plate ATF) a
Driven plate
T
Direction of oi! seal Li HP | i Cr i ij
CATFD : Apply A--F.
Drive plate Ea ©) : Apply petroleum jelly. * > Select with proper thickness. SAT915B
DISASSEMBLY
1. Gheck operation of low and reverse brake.
a.
Install seal ring onto oil pump cover and install reverse
clutch. Apply compressed air to oil hole.
b.
Check to see that retaining plate moves to snap ring.
c.
If retaining plate does not move to snap ring, D-ring or oil
seal may be damaged or fluid may be leaking at piston check ball.
2. Remove snap ring, low and reverse brake drive plates, driven plates and dish plate.
SATB73A
AT-120
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.