Assembly (Cont’d) - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › Assembly (Cont’d) - Nissan 180SX S13 Workshop Manual
Assembly (Cont’d)
ASSEMBLY
Assembly (Cont’d)
d. install converter housing on transmission case.
10. Adjust brake band. _ AL jos
a. Tighten anchor end bolt to specified torque. Sei = a Anchor end bolt:
AL Saray
GT }:4-6 Nem (0.4 - 6.6 kg-m, 2.9 - 4.3 ft-lb)
b. Back off anchor end bolt two and a half turns.
c. While holding anchor end pin, tighten lock nut.
. Install terminal cord assembly. end a, Install O-ring on terminal cord assembly. Apply petroleum jelly to O-ring. Te» Compress terminal cord assembly stopper and install ter- minal cord assembly on transmission case.
12. install control valve assembly.
a. Install accumulator piston return springs B, C and D. Free length of return springs: Unit: mm (in)
| Accumulator | c | D | ||
|---|---|---|---|---|
| Item | Free lerigth | 66 (2.60) | 45 (1.77} | 58.4 (2.299) |
AT-152
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.