REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Oil Pump T] : Nem (kg-m, fttb) Friction ring ©
TH: Apply AT.F.
Fra) : Apply petroleum jelly.
es . CATF) O-ring : Pivot pin Side seal ® Oi! pump housing Control piston Oil pump cover assembly Side seal ® Oil seal x) CATED Vane ring O-ring RIGatA |
~2) 16-21 (1.6 - 2,1, 12-15) High clutch seal ring
Pivot pin - Cami ring Spring seat Cam ring spring Reverse clutch seal ring ><] ‘oO SAT648A DISASSEMBLY _.. i
Loosen bolts in numerical order and remove oil purnp cover.
1. | x
M Remove rotor, vane rings and vanes. @® Inscribe a mark on back of rotor for identification of fore-aft direction when reassembling rotor. Then remove rotor.
ed While pushing on cam ring remove pivot pin. @ Be careful not to scratch oil pump housing.
SATESIA
AT-91
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.