REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Band Servo Piston Assembly
E-ring (large) Return spring A D-ring x] Return spring B Servo piston spring retainer O-ring x) Gasket ><) Piston stem
O-ring CIATED
O.D. servo
D-ring ><] CTF)
piston retainer
. LOOpor
E-ring (smail)
0.0. band servo piston Return spring C ‘4 Serve cushion spring retainer ag Band servo piston Servo piston retainer et ’ Apply A TF. et SAT9O8A 4 DISASSEMBLY
1. Block one oil hole in O.D. servo piston retainer and the ‘ center hole in O.D. band servo piston.
2. Apply compressed air to the other oil hole in piston retainer to remove 0.D. band servo piston from retainer.
3. Remove D-ring from ©.D. band servo piston.
4. Remove band servo piston assembly from servo piston retainer by pushing it forward.
5. Place piston stem end on a wooden block. While pushing servo piston spring retainer down, remove E-ring.
SATOIIA
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.