Freelander Service Procedures
DOORS
REPAIRS 76-1-25
Plastic sheet - front door - 5 door
$% 76.34.26
Remove
1. Remove front door speaker.
2. Remove 5 door pocket screw fixings.
3. Remove 2 door handle screw fixings. 04MY:
Remove 1 additional screw.
4. Release and discard plastic sheet.
Refit
1. Clean door contact area with white spirit.
2. Position NEW plastic sheet to door and seal in
position, by applying hand pressure to centre
bottom of sheet first then move out from this
point in both directions applying an even
pressure to the seal, smooth out any creases.
CAUTION: It is crucial that no creases are
present along the base of the plastic sheet.
3. Fit and secure door handle and pocket fixings.
4. Fit front door speaker.
Plastic sheet - rear door
$% 76.34.28
Remove
1. Remove rear door speaker.
REPAIRS, Speaker - rear - 5 door.
2. Noting their fitted position, remove 7 trim stud
retainers, 2 door pull screw retainers and 4
speaker screw retainers.
3. Release and discard plastic sheet.
Refit
1. Clean door contact area with white spirit.
2. Position NEW plastic sheet to door and seal in
position, by applying hand pressure to centre
bottom of sheet first then move out from this
point in both directions applying an even
pressure to the seal, smooth out any creases.
CAUTION: It is crucial that no creases are
present along the base of the plastic sheet.
3. Fit trim stud retainers and screw retainers to
door.
4. Fit rear door speaker.