LR3/Disco 3
A calculated quantity of oil must be drained from the new compressor before fitting. To calculate the quantity of oil to be
drained:
l
Remove the drain plug from the old compressor.
l
Invert the compressor and gravity drain the oil into a calibrated measuring cylinder. Rotate the compressor clutch
to ensure the compressor is completely drained.
l
Note the quantity of oil drained (Y cm³).
l
Calculate the quantity of oil to be drained from the new compressor using the following formula:X cm³ — (Y cm³ +
20 cm³) = Q cm³
l
Remove the drain plug from the new compressor and drain Q cm³ of oil. Fit and tighten the compressor drain plug.
Vehicle Weights
* Weight quoted is the maximum weight possible for vehicles in this model range; weights may be less for
certain variants depending upon trim level, territorial requirements etc.
Vehicle Dimensions
Item
kg
lb
Maximum Gross Vehicle Weight (GVW) - All models*
3230 7106
Maximum weight of unbraked trailer:
On-road
750
1650
Off-road
750
1650
Maximum towable weight (mass) - Trailers with overrun brakes
On-road
3500 7700
Off-road
1000 2205
Maximum roof rack load (Including the mass of the roof rack):
On-road
75
110
Off-road
75
110
Item
mm
in
Length - including number plate plinth - All models
4842 190.6
Width - All models:
Mirrors extended
2189 86.2
Mirrors folded
2009 79.1
Coil Suspension - Maximum height - At EEC kerb weight - All models:
With roof rack and rails
1891 74.4
With roof antenna module
1938 76.3
Air Suspension - Maximum height - At normal ride height - All models:
With roof rack and rails
1891 74.4
With roof antenna module
1938 76.3
Wheelbase - All models
2885 113.5
Front overhang - All models
820
32.3
Rear overhang - All models
1130 44.5
Maximum roof load
75 kg 165 lb
Track - All models:
Front
1601 63.0
Rear
1601 63.0
Coil Suspension:
Underbody - Running clearance to exhaust - Minimum - Kerb weight
185
7.3
