Freelander Service Procedures
AUTOMATIC GEARBOX - JATCO
44-24
REPAIRS
9. Remove and discard circlip from LH drive shaft.
10. Loosen selector cable trunnion nut.
11. Release clip, disconnect selector cable and
remove trunnion.
12. Remove bolt securing closing plate to gearbox.
13. Remove grommet from closing plate to gain
access to torque converter retaining bolts.
14. Mark drive plate to torque converter, for refit
purposes.
15. Rotate crankshaft for access and remove 4
bolts securing drive plate to torque converter.
16. Remove bolt and release earth lead from
gearbox.
17. Loosen clip and disconnect hose from
turbocharger outlet pipe.
M44 1681