Freelander Service Procedures
PANEL REPAIRS
REPAIRS 77-2-33
Refit
1. LH side: Fit horn.
2. LH side: Fit air intake hose.
3. LH side: Fit air cleaner.
4. LH side: Fit battery carrier. Do not connect
5. LH side: Fit ECM.
6. LH side: Fit front bumper LH support bracket.
7. RH side: Fit PAS pump.
8. RH side: Fit alternator.
9. RH side: Fit windscreen washer reservoir.
10. RH side: Fit front bumper RH support bracket.
11. Fit front wheel arch liner.
12. Fit engine bay shield.
13. Fit headlamp.
14. Secure headlamp wiring.
15. Fit PAS fluid cooler.
STEERING, REPAIRS, Oil cooler -
16. Fit radiator.
COOLING SYSTEM - K SERIES KV6,
17. Fit front bumper valance.
Bumper - assembly - front - up to 04MY.
18. Fit underbelly panel.
19. Connect all ECUs.
20. Connect battery earth lead.
Front valance assembly
Remove
1. Disconnect battery earth lead.
2. Disconnect all ECUs.
3. Remove road wheel(s).
4. Remove underbelly panel.
5. Remove front bumper valance.
Bumper - assembly - front - up to 04MY.
6. Remove front bumper armature.
7. Remove radiator.
COOLING SYSTEM - K SERIES KV6,
8. Remove PAS fluid cooler.
STEERING, REPAIRS, Oil cooler -
9. Remove headlamp.
10. Release wiring to headlamp and position aside.
11. Remove engine bay shield.
12. Remove front wheel arch liner.
13. Remove front wing.
14. Remove front suspension rear beam.
15. Remove engine and gearbox.
ENGINE - K SERIES KV6, REPAIRS,
Engine and automatic gearbox - up to 03MY.
16. Remove front damper.
17. Remove PAS rack.
18. Remove fascia.
19. LH side: Remove front bumper LH support
bracket.
20. LH side: Remove air cleaner.
21. LH side: Remove air intake hose.
22. LH side: Remove ECM.
23. LH side: Remove engine compartment
fusebox.
24. LH side: Remove battery carrier.
25. LH side: Remove engine compartment fuse
box and related wiring.