Workshop Manuals Factory service & repair Rover
Rover 800 Workshop Manual (1996-1999)08 · Engine management system - MEMS
08 · Engine

Engagement on/off switch - cruise control - KV6

Make
Rover
Model
800 Workshop Manual
Year
1996–1999
Section
Repairs › Engagement on/off switch - cruise control - KV6
Engine management system - MEMSEngagement on/off switch - cruise control - KV6

Refit

  1. Screw locknut fully onto switch.
  2. Screw switch into bracket until plunger just contacts pedal.
  3. Connect ohmmeter across terminals. if reading is infinity, turn switch anti-clockwise until zero reading is obtained.
  4. Turn switch clockwise until infinity reading is just obtained.
  5. Turn switch clockwise 1 complete turn and tighten locknut.

CAUTION: Ensure switch plunger does not hold pedal off its return stop.

  1. Connect multiplug to switch.
  2. Refit pedal closing panel.
  3. Refit fascia lower cover.

ENGAGEMENT ON/OFF SWITCH - CRUISE CONTROL - KV6

Service repair no - 19.75.30

  1. Remove fascia outboard switch pack See ELECTRICAL, Repairs.

Parts & tools for this job For 1996 Rover 800

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.