Rebuild

Dismantle

18. Remove 22 nuts securing headlining stowage
19. Remove stowage nets and headlining panel.
20. Collect 7 mounting plates.

Rebuild

21. Position stowage nets and headlining panel, fit

Refit

15. Release LH and RH, ’A’ post trim finishers from 22. With assistance, fit headlining and position to LH uppermost retaining clips.
23. Secure LH and RH, ’A’ post trim finisher
24. Fit rear sun roof aperture seal.

25. Fit and tighten screw securing rear headlining
26. Position vents to headlining, attach clips to vents
27. Position rear sun roof switch, connect multiplug
28. Position rear passenger interior lamp, connect
29. Fit front sun roof aperture seal.
30. Fit LH and RH sun visor retaining clips to body.
31. Fit and tighten screws securing sun visor
32. Fit RH alpine light trim casing.
33. Fit LH alpine light trim casing.
16. With assistance, release headlining from LH and 34. Fit front headlining stowage panel. RH, ’A’, ’B’ and ’D’ post finishers.
17. Remove headlining assembly. 35. Fit grab handles.
36. Fit sun visors.

nets and rear headlining panel.

mounting plates to studs and secure with nuts.

and RH, ’A’, ’B’ and ’D’ post finishers.

retaining clips.

panel to body.

and secure to headlining.

and secure to headlining panel.

multiplug and secure to headlining panel.

retaining clips and secure screw covers. See this section. See this section.

• See this
• section.
• See this section.
• See this section.