Freelander Service Procedures
ENGINE - K SERIES KV6
REPAIRS 12-3-69
Camshaft rear timing belt - LH cylinder
head
$% 12.65.56
Remove
1. Disconnect battery earth lead.
2. Remove underbelly panel.
3. Remove LH rear timing belt cover.
ENGINE - K SERIES KV6, REPAIRS,
Camshaft timing belt cover - LH rear.
4. Remove RH front road wheel.
5. Remove 3 bolts securing RH splash shield to
body and remove shield.
6. Using a socket on crankshaft pulley bolt, rotate
crankshaft in a clockwise direction. Align the
engine "SAFE" position, notch on crankshaft
pulley aligned to the "ARROW" on front
mounting plate and the timing marks aligned on
the rear camshaft gears as illustrated.
CAUTION: Do not use camshaft gear bolts
or timing belt to rotate crankshaft. Never
use the arrow on the oil pump body as a
timing reference.
7. Insert timing pin LRT-12-232 through hole in
lower crankcase, ensuring pin is located in hole
in drive plate.
CAUTION: Hole immediately adjacent to
side of lower crankcase must be used.
M12 6614
LRT-12-232
M12 7927
