Freelander Service Procedures
ENGINE - K SERIES KV6
REPAIRS 12-3-55
Refit
1. Ensure oil pressure switch and mating face is
clean.
2. Fit oil pressure switch using a new sealing
washer and tighten to 14 Nm (10 lbf.ft).
3. Connect multiplug to oil pressure switch.
4. Remove oil container from underneath of
engine.
5. Fit splash shield and secure with bolts.
6. Fit RH road wheel and tighten nuts to 115 Nm
(85 lbf.ft).
7. Fit underbelly panel.
8. Check engine oil level, top-up if necessary.
9. Connect battery earth lead.
Oil pressure relief valve
$% 12.60.56
Remove
1. Disconnect battery earth lead.
2. Remove underbelly panel.
3. Remove RH front road wheel.
4. Remove 3 bolts securing RH splash shield to
body and remove shield.
5. Place suitable container under oil filter to collect
spillage.
6. Using strap wrench, remove and discard oil
filter.
M12 6614
M12 6660