Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)31 · Electrical
31 · Electrical

Interior light

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Interior light
ElectricalInterior light

INTERIOR LIGHT

Service repair no - 86.45.02

Remove

Interior light – Service repair no - 86.45.02
  1. Carefully prise out the lens from the light housing.
  2. Remove 2 nuts securing interior light to roof.
  3. Disconnect multiplug and remove interior light.

Refit

  1. Position interior light to roof and connect multiplug.
  2. Fit and tighten nuts securing interior light to roof.
  3. Fit lens to interior light.

GLOVEBOX LAMP

Service repair no - 86.45.08

Remove

  1. Open glovebox.
Glovebox lamp – Open glovebox.
  1. Release lamp from fascia.
  2. Disconnect 2 Lucar connectors and remove lamp.

Refit

  1. Position lamp to fascia and connect Lucars.
  2. Fit lamp to fascia.
  3. Close glovebox.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.