Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)31 · Electrical
31 · Electrical

Starter switch

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Starter switch
ElectricalStarter switch · page 1 of 2

Refit

  1. Clean starter solenoid and mating face of starter motor.
  2. Lubricate solenoid operating plunger
  3. Position starter solenoid to starter motor and engage solenoid operating plunger to starter lever.
  4. Fit starter solenoid to starter motor and secure with nuts.
  5. Connect starter motor cable to starter solenoid and secure with nut.
  6. Fit starter motor. See this section.
  7. Connect battery earth lead.

STARTER SWITCH

Service repair no - 86.65.03

Remove

CAUTION: See SRS safety precautions before commencement of repair. See RESTRAINT SYSTEMS, Precautions.

  1. Remove steering column nacelle. See STEERING, Repairs.
  2. 98MY on: Remove passive coil. See this section.
Starter switch – 98MY on: Remove passive coil. See this section.
  1. Disconnect starter switch multiplugs from fuse box and main harness.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.