Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)31 · Electrical
31 · Electrical

Automatic gear selector bulb

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Automatic gear selector bulb
ElectricalAutomatic gear selector bulb · page 1 of 2

AUTOMATIC GEAR SELECTOR BULB

Service repair no - 86.45.40

Remove

  1. Remove front console. See BODY, Interior trim components.
Automatic gear selector bulb – Remove front console. See BODY, Interior trim components.
  1. Release bulb holder from selector nacelle.
  2. Remove bulb from holder.

Refit

  1. Fit new bulb to holder and secure to selector nacelle.
  2. Fit front console. See BODY, Interior trim components.

STARTER MOTOR - AUTOMATIC GEARBOX

Service repair no - 86.60.01

Remove

  1. Remove air cleaner. See ENGINE MANAGEMENT SYSTEM - MEMS, Repairs.
Starter motor - automatic gearbox – Remove air cleaner. See ENGINE MANAGEMENT SYSTEM - MEMS, Repairs.
  1. Remove bolt securing dipstick tube to gearbox.
  2. Remove dipstick tube from gearbox and collect ’O’ ring.
Starter motor - automatic gearbox – Remove dipstick tube from gearbox and collect ’O’ ring.
  1. Remove nut securing positive battery lead to starter solenoid.
  2. Release lead from solenoid and collect spring washer.
  3. Disconnect Lucar from solenoid.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.