Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - D Series07 Engine - L Series08 Engine - T Series09 Emission control10 Engine management system - MEMS11 Engine management system - PGMFi12 Engine management system - EDC13 Fuel delivery system14 Cooling system15 Cooling system - L Series16 Manifold & exhaust systems17 Clutch18 Manual gearbox - R6519 Manual gearbox - PG120 Automatic gearbox21 Drive shafts22 Steering23 Suspension24 Brakes25 Restraint systems26 Body27 Heating & ventilation28 Air conditioning29 Wipers & washers30 Electrical31 Instruments
Rover 400 Workshop Manual (1995-2000)30 · Electrical
30 · Electrical

Boot compartment lamp

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Boot compartment lamp
ElectricalBoot compartment lamp

BOOT COMPARTMENT LAMP

Service repair no - 86.45.16

Remove

Boot compartment lamp – Service repair no - 86.45.16
  1. Remove lens from lamp and release lamp from body panel.
  2. Disconnect multiplug and remove lamp.

Refit

  1. Connect multiplug to new lamp and fit lamp assembly to body panel.

GEAR SELECTOR LAMP BULB

Service repair no - 86.45.40

Remove

  1. Remove front console. See BODY, Interior trim components.
Gear selector lamp bulb – Remove front console. See BODY, Interior trim components.
  1. Release bulb holder from selector housing.
  2. Remove bulb.

Refit

  1. Fit bulb and secure holder to selector housing.
  2. Fit front console. See BODY, Interior trim components.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.