Workshop Manuals Factory service & repair Rover
Rover 800 Workshop Manual (1996-1999)04 · Engine - KV6
04 · Engine

Engine and automatic gearbox

Make
Rover
Model
800 Workshop Manual
Year
1996–1999
Section
Repairs › Engine and automatic gearbox
Engine - KV6Engine and automatic gearbox · page 1 of 6

ENGINE AND AUTOMATIC GEARBOX

Service repair no - 12.37.01/99

Remove

  1. Release spring clips retaining bonnet struts.
  2. Disconnect struts and tie bonnet back.
  3. Remove air cleaner assembly. See ENGINE MANAGEMENT SYSTEM - MEMS, Repairs.
  4. Remove battery. See ELECTRICAL, Repairs.
  5. Remove inlet manifold chamber. See MANIFOLD & EXHAUST SYSTEMS, Repairs.
  6. Raise front of vehicle.

WARNING: Support on safety stands.

  1. Remove radiator assembly. See COOLING SYSTEM - ’KV6’, Repairs.
Engine and automatic gearbox – Remove radiator assembly. See COOLING SYSTEM - ’KV6’, Repairs.
  1. Remove 2 screws securing spark plug cover.
  2. Remove cover.
Engine and automatic gearbox – Remove cover.
  1. Remove bolt securing PAS pipe to engine bracket.
  2. Release coolant hose from clip on PAS pipe.
  3. Release clip and disconnect hose from expansion tank.

Parts & tools for this job For 1996 Rover 800

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.