A2: Body
Steering & suspension
Body & interior
Engine
Transmission
General
Heating & A/C
Choose Sections to see everything in a chapter, or a chapter title to start at its first page.
Body Self-diagnosis › Self diagnosis, V.A.G Inspection Service36 pages
Self-diagnosis of airbag system BTU (basic triggering unit) with side airbag2 pages
Self-diagnosis for convenience system16 pages
- Function description
- Function display
- System description of the anti-theft alarm with interior monitoring
- Initiating self-diagnosis for the convenience system
- Interrogating control unit version
- Encoding control unit for convenience system using fault reader V.A.G 1551
- Interrogating fault memory
- Erasing fault memory
- End of output
- Final control diagnosis
- Reading measured value block
- Matching of radio-operated remote control keys
- Synchronising/re-matching of existing radio-operated remote control keys
- Adaption
- Checking data exchange between control units
Fault table for convenience system3 pages
Ultrasonic interior monitoring self-diagnosis13 pages
- General notes
- Initiating self-diagnosis of the interior monitoring
- Interrogating fault memory
- Fault table for interior monitoring
- Interrogating control unit version
- Final control diagnosis
- Encoding control unit
- Reading measured value block
- Summary of measured value blocks
- Adaption
- Erasing fault memory
- End of output
General body repairs, exterior110 pages
Bonnet, flaps, cab, central locking8 pages
Front door, central locking › Front door18 pages
- Contact corrosion
- Tools
- Removing and installing mounting panel
- Removing and installing mounting panel
- Removing and installing front door and door subframe
- Panel gaps for door adjustment
- Door hinges (front)
- Panel gaps
- Removing and installing door arrester
- Removing and installing window lifter and door window
- Door handle and door lock (front) - exploded view
- Removing lock cylinder and door handle
- Installing door handle
- Removing and installing door lock (front)
- Removing and installing window guide and window slot trim panel
- Removing and installing door seal (outer)
- Removing and installing door seal (inner)
- Seal on door (front)/ mounting panel and on opening for exterior mirror wiring in door subframe
Rear door,sliding door,wing doors,central locking › Rear doors16 pages
- Contact corrosion
- Tools
- Removing and installing mounting panel
- Removing and installing mounting panel
- Removing and installing rear door and door subframe
- Panel gaps for door adjustment
- Door hinges (rear)
- Panel gaps
- Removing and installing door arrester
- Removing and installing window lifter and door window
- Rear door handle and door lock - exploded view
- Removing and installing door lock (rear)
- Removing and installing window guide and window slot trim panel
- Removing and installing door seal (outer)
- Removing and installing door seal (inner)
- Seal on rear door/mounting panel
Sliding roof › Servicing sliding/tilting sunroof11 pages
Bumper5 pages
Glazing/window mechanism26 pages
Exterior equipment20 pages
General body repairs, interior230 pages
Technical data2 pages
Interior equipment24 pages
Storage compartments/covers14 pages
- Removing and installing glove box
- Removing cushioning mechanism for glove box lid
- Removing and installing glove box lid
- Removing storage compartment (driver side)
- Removing ashtray and storage compartment
- Removing cup holder and hazard warning switch
- Removing and installing rear centre console side trim
- Removing and installing rear centre console knee guide
- Removing and installing rear centre console attachments
- Removing and installing rear centre console
- Removing and installing additional rear storage compartment
- Removing and installing front holder for additional rear storage compartment
- Removing and installing rear holder for additional rear storage compartment
Interior mirror10 pages
Passenger protection50 pages
Seat belts10 pages
- Safety requirements for handling pyrotechnic belt tensioners
- Storing, transporting and disposing of airbag units, belt tensioner units and battery isolation units (pyrotechnic components)
- Seat belt anchorage points (exploded view)
- Removing and installing three-point seat belt with belt height adjuster and belt tensioner
- Buckle anchorage point
- Outer floor panel anchorage point
- Rear buckle anchorage point
- Rear buckle anchorage point for lightweight seats
- Removing and installing rear three-point seat belt
- Removing and installing Isofix holder for front passenger's seat
Checking seat belts9 pages
Airbag safety regulations8 pages
Servicing driver's airbag6 pages
Servicing front passenger's airbag4 pages
Trim, noise insulation73 pages
Front door trim16 pages
- Exploded view of attachments
- Removing and installing front door trim
- Removing and installing driver's window lifter switch unit with mirror adjustment switch
- Removing driver's window lifter switch from trim
- Removing mirror adjustment switch
- Removing and installing front passenger's window lifter switch
- Removing front passenger's window lifter switch from trim
- Removing and installing sound absorber for front door trim
- Removing central locking switch
- Removing interior door handle
- Removing and installing treble loudspeaker
- Removing treble loudspeaker trim
- Removing bass loudspeaker trim
- Interior mirror trim panel
- Exploded view of door trim cable routing
Rear door trim13 pages
- Exploded view of fitting locations
- Removing and installing rear door trim
- Removing rear window crank
- Removing and installing window lifter switch unit
- Removing and installing sound absorber for rear door trim
- Exploded view of door trim cable routing
- Removing and installing treble loudspeaker
- Interior mirror trim panel
- Removing treble loudspeaker trim
- Removing bass loudspeaker trim
- Removing interior door handle
- Removing window lifter switch from trim
Removing and installing central tube7 pages
Trim panels28 pages
- Removing and installing upper A-pillar trim
- Removing and installing rear upper A-pillar trim
- Removing and installing lower A-pillar trim
- Removing and installing upper B-pillar trim
- Removing and installing lower B-pillar trim
- Removing and installing handbrake lever trim
- Removing and installing foot rest (LHD vehicles)
- Removing and installing foot rest (RHD vehicles)
- Removing and installing foot rest bracket (RHD vehicles)
- Removing C-pillar trim
- Removing D-pillar trim
- Removing and installing holder for D-pillar
- Rear inner wheel housing trim
- Removing and installing rear cross panel trim
- Removing and installing securing strap for rear cross panel trim
- Luggage compartment floor lining
- Removing load compartment floor
- Luggage compartment floor lining trim strip
- Luggage compartment side trim
- Left load compartment floor mount
- Right load compartment floor mount
- Cover for load compartment floor mount
- Removing and installing rear lid trim
- Removing seat console trim on tunnel side
- Removing seat console trim on sill panel side
- Removing and installing front floor covering
- Removing and installing rear floor covering
Seat frames63 pages
Front seats (standard seat, sports seat)23 pages
- Exploded view of backrest components
- Exploded view of seat components
- Removing seat console trim on tunnel side
- Removing seat console trim on sill panel side
- Removing and installing seat
- Connecting airbag adapter VAS 5094
- Removing and installing front seat backrest
- Interchanging left and right backrest
- Removing seat side trim
- Removing fitting trim
- Removing backrest adjuster
- Removing holder for seat side trim
- Removing seat pan
- Removing height adjustment handle
- Removing handle for fore-and-aft adjustment
- Removing plate at lever for fore-and-aft adjustment
- Removing height adjustment lever
- Removing side airbag frame
- Removing spring mat
- Removing and installing lumbar support with motor
- Removing and installing lumbar support
- Removing and installing lumbar support motor
Rear seats (4-seater)15 pages
- Exploded view of components (split backrest)
- Removing and installing split backrest
- Rear seat front floor attachment
- Rear seat rear floor attachment
- Removing striker plate
- Removing and installing lower release handle
- Removing and installing upper release handle
- Removing and installing upper release handle trim
- Removing and installing release mechanism
- Removing and installing seat cushion cover panel
- Removing and installing backrest section cover panel
- Removing and installing inner and outer fitting trim
- Removing and installing release mechanism trim
- Releasing rear seat following removal
Rear seats (5-seater)15 pages
- Removing and installing rear seat
- Removing and installing rear seat front floor attachment
- Removing and installing rear seat rear floor attachment
- Removing and installing striker plate
- Removing and installing locking elements
- Releasing rear seat following removal
- Removing and installing lower release handle
- Removing and installing inner and outer fitting trim
- Removing and installing upper release handle trim
- Removing and installing upper release handle
- Removing and installing release mechanism trim
- Removing and installing release mechanism
- Removing and installing seat cushion cover panel
- Removing and installing backrest section cover panel
Lightweight rear seats10 pages
- Exploded view of lightweight rear seat bench components
- Exploded view of fixed lightweight rear seat backrest components
- Removing and installing lightweight rear seat bench
- Removing and installing rear seat bench front floor attachment
- Removing and installing fixed lightweight rear seat backrest
- Removing and installing upper attachment
- Removing and installing rear fastener
- Removing and installing buckle plate
- Removing and installing Horstfix
Seat padding, covers18 pages
Front seat covers and padding (standard seat, sports seat)8 pages
Removing and installing cover and padding for seat cushion2 pages
Removing and installing backrest cover and padding4 pages
- Cutting out cover for side airbag
Rear seat covers and padding (4-seater)3 pages
Rear seat covers and padding (5-seater)3 pages
Fitting instructions: retrofitting key-operated switch to deactivate airbag on front passenger side › Passenger protection97 pages
- Overview of retrofitting options
Notes and overview of components13 pages
- General information
Overview of components11 pages
- Notes on overview of components
- Audi A3 1997 ? from week 27/1999 onwards
- Audi A3 2004 ? (including Audi A3 Sportback)
- Audi A4 1995 ? from chassis no. 8DXA 200 001 onwards
- Audi A4 2001 ? up to week 35/2004 (including Audi S4)
- Audi A4 2001 ? from week 36/2004 onwards (including Audi S4)
- Audi A6 1998 ? from week 36/1998 onwards (including Audi Allroad, except vehicles with V8 engine)
- Audi A6 2005 ?
- Audi A8 1994 ?, gradual introduction from approx. week 41/1998 onwards (with front and side or front and curtain airbag)
- Audi A8 2003 ?
- Deactivating/activating airbag on front passenger side (Audi A2 2001 ?)
Retrofitting key-operated switch (Audi A3 1997 ? from week 27/1999 onwards)7 pages
- Removing glove box
- Installing key-operated switch
- Installing new glove box
Installing warning lamp for airbag deactivated on front passenger side3 pages
Retrofitting key-operated switch (Audi A3 2004 ? including Audi A3 Sportback and Audi A3 Cabriolet 2008 ?)9 pages
- Removing and installing glove box
- Converting glove box
- Routing and securing glove box wiring harness
- Installing key-operated switch
Installing warning lamp for airbag deactivated on front passenger side4 pages
- Removing front interior light W1 without warning lamp for airbag deactivated on front passenger side
- Installing front interior light W1 with warning lamp for airbag deactivated on front passenger side (up to approx. week 22/200
- Installing warning lamp for airbag deactivated on front passenger side K145 (from approx. week 23/2004 onwards)
Retrofitting key-operated switch (Audi A4 1995 ? from chassis no. 8DXA 200 001 onwards)8 pages
- Removing glove box
- Converting glove box
- Installing key-operated switch
- Installing glove box
Installing warning lamp for airbag deactivated on front passenger side3 pages
Retrofitting key-operated switch (Audi A4 2001 ? up to week 35/2004 including Audi S4 and Audi S4 Cabriolet)10 pages
- Removing glove box
- Converting glove box
- Installing key-operated switch
- Retrofitting wiring harness
- Installing glove box
Installing warning lamp for airbag deactivated on front passenger side4 pages
- Removing front interior light W1 without warning lamp for airbag deactivated on front passenger side (up to approx. week 44/20
- Installing front interior light W1 with warning lamp for airbag deactivated on front passenger side (up to approx. week 44/200
- Installing warning lamp for airbag deactivated on front passenger side K145 (from approx. week 45/2003 onwards)
Retrofitting key-operated switch (Audi A4 2001 ? from week 36/2004 onwards including Audi S4 and Audi S4 Cabriolet)8 pages
- Removing glove box
- Converting glove box
- Installing key-operated switch
- Retrofitting wiring harness
- Installing glove box
Installing warning lamp for airbag deactivated on front passenger side2 pages
Retrofitting wiring harnesses 8E1 970 XXX (Audi A4 2001 ?)5 pages
- Retrofitting key-operated switch (Audi A4 Cabriolet 2003 ?)
Retrofitting key-operated switch (Audi A6 1998 ? from week 36/1998 onwards including Audi Allroad, except vehicles with V8 engin8 pages
- Removing glove box
- Converting glove box
- Installing key-operated switch
- Installing glove box
Installing warning lamp for airbag deactivated on front passenger side3 pages
Retrofitting key-operated switch (Audi A6 2005 ?)7 pages
- Removing glove box
- Converting glove box
- Installing glove box
Installing warning lamp for airbag deactivated on front passenger side3 pages
Retrofitting key-operated switch (Audi A8 1994 ?, gradual introduction from approx. week 41/1998 onwards, with front and side or8 pages
- Removing glove box
- Converting glove box
- Installing key-operated switch
- Installing glove box
Installing warning lamp for airbag deactivated on front passenger side3 pages
Retrofitting key-operated switch (Audi A8 2003 ?)8 pages
- Removing glove box
- Converting glove box
- Installing key-operated switch
- Installing glove box
Installing warning lamp for airbag deactivated on front passenger side2 pages
- Installing trim panel with switch module (right-side) with warning lamp for airbag deactivated on front passenger side
- Retrofitting key-operated switch (Audi TT 1999 ?, Coupé/Roadster)
- Coding airbag control unit J234
- Adapting airbag control unit J234 (Audi A6 2005 ?)