Workshop Manuals Factory service & repair Rover
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition18 · Electrical
18 · Electrical

Indicator Input Test (page 2 of 2)

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Repairs
ElectricalIndicator Input Test · page 2 of 2
No. Terminal Test condition Test; Desired result Possible cause if result is not obtained.
1 YEL Ignition switch ON Check for voltage to earth; There should be battery voltage
  • Blown No. 8 (10A) fuse in the passenger compartment fuse/relay box
  • An open in the wire
2 GRN/BLK Boot lid open Check for continuity to earth; There should be continuity.
Note: Before testing, remove No. 29 (15A) fuse in the engine compartment fuse/relay box.
  • Faulty boot latch switch
  • Poor earth (LHD: G501, RHD: G701)
  • An open in the wire
3 BLK/WHT Interior light switch switch in the "MIDDLE" position Connect to earth: Interior lights should come on.
  • Faulty entry light timer circuit
  • Blown No. 29 (15A) fuse in the engine compartment fuse/relay box
  • Faulty interior light
  • An open in the wire
4 GRN/BLU Left front door open Check for voltage to earth:
There should be 1V or less.
  • Faulty door switch
  • An open in the wire
GRN/RED Right front door open
GRN/YEL Left rear door open
GRN/WHT Right rear door open

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.