Circuit Diagram (page 2 of 4)
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Repairs
ElectricalCircuit Diagram · page 2 of 4
Note: The numbers in the table show the fault finding sequence.
| Symptom | No. | Item to be inspected |
|---|---|---|
| Power door lock system does not work at all. | 1 | Check No. 21 (20A) fuse (In the engine compartment fuse/relay box). |
| 2 | Control unit input | |
| All doors do not lock with the driver's door lock knob switch. | 1 | Door lock knob switch. |
| 2 | Check No. 21 (20A) fuse (In the engine compartment fuse/relay box). | |
| 3 | Control unit input | |
| 4 | Disconnected or obstructed door lock rod/linkage. | |
| One or more doors do not lock with the driver's door lock knob switch. | 1 | Passenger door lock actuator. |
| 2 | Disconnected or obstructed door lock rod/linkage. |
Parts & tools for this job For Rover 600
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.