Leon Mk2: Body
Also for this vehicle: Leon Mk1.
Transmission
Steering & suspension
Body & interior
General
Engine
Heating & A/C
Diagnostics
Choose Sections to see everything in a chapter, or a chapter title to start at its first page.
General external body assembly work99 pages
Body front › Body, front8 pages
Bonnet, flaps, cab, central locking15 pages
Bonnet7 pages
Fuel tank flap unit8 pages
Front door, central locking29 pages
Front door16 pages
Central locking13 pages
- Central locking: General installation diagram
- New joints and distribution parts for hose joints
- Double-pressure pump: dismantling and fitting
- Rear door lock action dismantling and fitting
- Central locking test with radiofrequency remote control
- Synchronization of keys with radiofrequency remote control ? 09.99
Rear door,sliding door,wing doors,central locking › Rear door6 pages
Bumper4 pages
Glazing/window mechanism23 pages
Follower stuck windows12 pages
- Materials
- Windscreen glass: general installation diagram
- Windscreen glass: removal
- Windscreen glass: fitting
- Preparing the non-deteriorated glass for installation
- Preparation for a new windscreen
- Preparing the bodywork flange for the glass installation
- Installation instructions
- Drying or setting time
- Paintwork damage: reworking
- Clean for dirtiness caused by sealant adhesive
- Side window glass: dismantling and fitting
Exterior equipment14 pages
General body repairs, interior538 pages
Technical data › Safety instructions18 pages
- Safety measures when working with pyrotechnic components
- Storage, transportation and disposal of airbag, belt tensioner and battery isolator units (pyrotechnic components)
- Safety instructions for airbag
- Additional safety regulations for side airbag
- Seat belts
- Safety precautions for crash sensors (pressure sensors) for side airbag (front)
- Renewing pyrotechnic, electrical and mechanical components of the restraint system following an accident
- Checking airbag securing parts after an accident
- Accident without airbag triggering
- Checking seat belts
- Checking belt webbing
- Checking inertia reel (locking mechanism)
- Checking seat belt buckle
- Functional check of belt buckle
- Check guide fittings and latch plate
- Checking securing parts and anchorage points after an accident
- Checking child seat anchors after an accident
Interior equipment118 pages
Interior mirror12 pages
Interior rear-view mirror5 pages
Storage compartments/covers17 pages
- Installation location overview - storage compartments/covers
- Assembly overview - driver side dash panel cover
- Assembly overview - steering column trim
- Assembly overview - glove compartment
- Assembly overview - handbrake lever boot
Removing and installing dash panel cover on driver's side3 pages
- Removing and installing dash panel insert trim
- Removing and installing dash panel trim (passenger side)
- Removing and installing upper steering column trim
- Removing and installing lower steering column trim
- Removing and installing glove compartment
- Removing and installing glove compartment opener
- Removing and installing glove compartment cover brake element
- Removing and installing handbrake lever boot
Shelves, trim, covers and trays11 pages
- Central console: removal
- Hand grip and covering for handbrake lever: removal
- Driver's side shelf: removal
- Cover driver's side footwell: removal
- Passenger's side shelf: removal
- Instrument panel trim: removal
- Roof grip: removal
- Sunshade: removal
- Shelf in the internal lining for the front part of the roof: removal
- Heel cushion moulding: removal and installation
Compartments, covers and trims37 pages
Removing and installing storage compartment, front passenger side ? 05.003 pages
Central console12 pages
- Assembly overview - centre console
- Removing and installing ashtray (front)
- Removing and installing centre console insert
Removing and installing centre console4 pages
Removing and installing centre console bracket4 pages
- Assembly overview - securing bracket
- Removing and installing front securing bracket
- Removing and installing middle securing bracket
- Removing and installing middle securing bracket
Luggage compartment cover4 pages
Grab handles7 pages
Sill panel trims8 pages
Passenger protection94 pages
Seat belts13 pages
- Safety regulations for belt tensioners
- Disposal of belt tensioner units
- Assembly overview - front seat belt with belt tensioner
- Assembly overview - belt inertia reel with tensioner unit
- Assembly overview - outer seat belt, second seat row
- Assembly overview - lap belt on single seat
- Assembly overview - middle three-point seat belt, second seat row
- Assembly overview - seat belt, third seat row
- Seat belt of integrated child seat
Safety regulations and test methods for pyrotechnic, electrical and mechanical components of the restraint system17 pages
- General safety regulations
- Disposal of pyrotechnic components of the restraint system
- Additional safety regulations for side airbag
- Additional safety regulations for curtain airbags
- Safety precautions for crash sensors (pressure sensors) for side airbag (front)
- Renewing pyrotechnic, electrical and mechanical components of the restraint system following an accident
- Checking airbag mounting components following an accident
- Accident without airbag triggering
- Checking securing parts and anchorage points after an accident
Safety belts21 pages
- Safety regulations relating to the seat belt tensioner
- Seat belt tensioner: checking
- Front safety belts with tensioning system: removing and installing
- Safety belt height regulator: removal
- Front safety belt catch: removal
- Rear safety belts: removal and installation
- Automatic rear seat belt mechanism: removal and installation
- Lap seat belt and double catch: removal and installation
Checking the safety belts9 pages
Airbag13 pages
- General plan of fitting points
- Safety precautions when working on the airbag system
Change airbag units after an accident3 pages
- Airbag unit, driver's side: removal and installation
- Steering wheel: removal and installation
- Recoil ring and friction ring: removing and installing
- Airbag unit, passenger's side: removal and installation
Airbag control unit3 pages
Airbag (driver side)3 pages
Trim, noise insulation198 pages
Dash panel11 pages
Door trims18 pages
Front door trim11 pages
- Front door trim: Assembly overview
- Front door trim: Removing and installing.
- Wiring in front door trim
- Rear door lining fitted with manual window lifter: Assembly overview
- Rear door lining fitted with manual window lifter: Removing and installing.
- Rear door lining fitted with electrical window riser: Assembly overview
- Rear door lining fitted with manual window lifter: Luggage compartment trim, ST model
- Rear door lining fitted with electrical window riser: Luggage compartment trim, ST model
- Rear door lining fitted with manual / electrical window risers, model ST: Removing and installing.
- Wiring in rear door trim
Dash panel central tube5 pages
- Assembly overview - dash panel central tube
Removing and installing dash panel central tube3 pages
Door panels11 pages
- Tools
- Front door inside panel: assembly diagram
Front door inside panel: removal and installation4 pages
- Rear door panel: assembly diagram
Pillar and side trims11 pages
Strut linings and side linings40 pages
- Interior compartment trim , 3-door vehicles
- Interior compartment trim , 5-door vehicles
- Passenger compartment lining, ST model
- Upper A-pillar trim: Assembly overview
- Upper A-pillar trim: Removing and installing.
- Upper B-pillar trim (3-door vehicles): Assembly overview
- B-pillar trim, 3-door vehicles: fitting Loosening and tightening
- Upper B-pillar trim (3-door vehicles): Removing and installing.
- B-pillar trim, 5-door vehicles and ST: Assembly overview
- B-pillar trim, 5-door vehicles and ST: Loosening and tightening
- B-pillar trim, 5-door vehicles and ST: Removing and installing.
- Partition top and bottom, commercial vehicles: assembly overview Assembly overview
- Partition, top, commercial vehicles: Removing and installing.
- Partition, bottom, commercial vehicles: Removing and installing.
- B-pillar trim, 3-door vehicles: fitting Assembly overview
- B-pillar trim, 3-door vehicles: fitting Removing and installing.
- Upper C-pillar trim and storage brackets, commercial vehicles: assembly overview Assembly overview
- Upper C-pillar trim, commercial vehicles: Removing and installing.
- Storage brackets, commercial vehicles: Removing and installing.
- B-pillar trim, 5-door vehicles: fitting Assembly overview
- B-pillar trim, 5-door vehicles: fitting Removing and installing.
- Upper C-pillar trim, Model ST: Assembly overview
- Upper C-pillar trim, Model ST: Removing and installing.
- Lower C-pillar trim: Assembly overview
- Lower C-pillar trim: Removing and installing.
- D-pillar trim, ST models: Assembly overview
- D-pillar trim, ST models: Removing and installing.
- Left storage bracket, ST models: assembly overview Assembly overview
- Right storage bracket, ST model: Assembly overview
- Left storage bracket, ST models: assembly overview Removing and installing.
- Right storage bracket, ST model: Removing and installing.
- Side panel (3-door vehicles): Assembly overview
- Side panel (3-door vehicles): Removing and installing.
- Sill panel strip, vehicles with 5 doors and ST: Assembly overview
- Sill panel strip, vehicles with 5 doors and ST: Removing and installing.
- Door sill (3-door vehicles): Assembly overview
- Door sill (3-door vehicles): Removing and installing.
- Interior floor carpet: Removing and installing.
- Floor covering, commercial vehicles: Removing and installing.
Interior trims27 pages
Installation location overview - interior trims3 pages
- Assembly overview - sill moulding
- Assembly overview - A-pillar trim
- Assembly overview - C-pillar trim
Removing and installing sill moulding2 pages
Removing and installing B-pillar trim3 pages
Removing and installing C-pillar trim3 pages
- Removing and installing side trim
- Removing and installing foot rest
Removing and installing floor covering4 pages
- Removing and installing rear shelf
Support lining and side panels7 pages
Luggage/load compartment trim5 pages
Rear lid trim8 pages
Luggage compartment lining19 pages
- Luggage compartment trim, 5-door vehicles
- Luggage compartment trim, 3-door vehicles
- Luggage compartment trim, commercial vehicles:
- Luggage compartment trim, ST model
- Rear tailgate lining, 3 and 5-door vehicles: Assembly overview
- Rear tailgate lining, 3 and 5-door vehicles: Removing and installing.
- Tailgate trim, ST models: Assembly overview
- Tailgate trim, ST models: Removing and installing.
- Side trim in the luggage compartment, vehicles with?3 and 5?doors: fitting Assembly overview
- Side trim in the luggage compartment, vehicles with?3 and 5?doors: fitting Removing and installing.
- Side trim in the luggage compartment, commercial vehicles: Assembly overview
- Side trim in the luggage compartment, commercial vehicles: Removing and installing.
- Side trim in the luggage compartment, ST models: assembly overview Assembly overview
- Side trim in the luggage compartment, ST models: assembly overview Removing and installing.
- Rear lock support cover Assembly overview
- Rear lock carrier cover: Removing and installing.
- Rear lock carrier trim, ST models: assembly overview Assembly overview
- Rear lock carrier trim, ST models: assembly overview Removing and installing.
Luggage compartment trims10 pages
- Installation location overview - load compartment trims
- Assembly overview - load compartment side trim
- Removing and installing rear lid trim
- Removing and installing luggage compartment side trim
Removing and installing load compartment floor4 pages
- Removing and installing load compartment floor covering bracket
Roof trims4 pages
- Front roof interior moulding: removal and installation
Seat frames34 pages
Overview of seat versions3 pages
Front seats15 pages
- Headrest guides: removal
- Front seat front bush: general assembly diagram
- Seat back: removal and installation
- Seat frame: general assembly diagram
- Seat frame, foldable model: general assembly diagram
Control cable for releasing the foldable seat: remove, fit and adjust4 pages
- Loop: removal
- Seat back frame: general assembly diagram
Front seat trims14 pages
- Seat panel with height adjustment (5-door models): Assembly overview
- Seat panel with height adjustment (5-door models): Removing and installing.
- Seat panel without height adjustment (5-door models): Assembly overview
- Seat panel without height adjustment (5-door models): Removing and installing.
- Seat panel with height adjustment (3-door models): Assembly overview
- Seat panel with height adjustment (3-door models): Removing and installing.
- Seat panel without height adjustment (3-door models): Assembly overview
- Seat panel without height adjustment (3-door models): Removing and installing.
- Seat trim with height adjustment (CUPRA version): Assembly overview
- Seat trim with height adjustment (CUPRA version): Removing and installing.
- Seat trim without height adjustment (CUPRA version): Assembly overview
- Seat trim without height adjustment (CUPRA version): Removing and installing.
- Seat height adjustment element: removal and assembly
Seat padding, covers76 pages
Front seat covers and padding10 pages
Front seat upholstery and padding12 pages
- Front seat upholstery and padding: assembly diagram
Seat upholstery and padding: front: removal and installation5 pages
Front seat back upholstery and padding: assembly diagram2 pages
- Upholstery and padding for seat base (split): assembly diagram
- Upholstery and padding for seat base (split): removal and installation
- Seat back upholstery and padding (split): removal and installation
Upholstery and padding of rear seats10 pages
- Tools
- Assembly overview - cover and padding for rear seat
Removing and installing cover and padding for rear seat3 pages
- Assembly overview - cover and padding for rear backrest
Removing and installing cover and padding for rear backrest3 pages
Rear seat covers and padding7 pages
Assembly overview - cover and cushion3 pages
Removing and installing cover and cushion3 pages
Upholstery and padding for rear seats, general installation overview15 pages
- Upholstery and padding for the split rear bench seat: Assembly overview
- Upholstery and padding for the split rear bench seat: Removing and installing.
- Cover and padding for the continuous rear bench seat: Assembly overview
- Cover and padding for the continuous rear bench seat: Removing and installing.
- Upholstery and padding for (divided) rear bench seat: removal Assembly overview
- Cover and padding for 1/3 rear seat backrest, left side: Removing and installing.
- Cover and padding for 2/3 rear seat backrest, right side: Removing and installing.
- Cover and padding for the continuous rear seat backrest: Assembly overview
- Cover and padding for the continuous rear seat backrest: Removing and installing.
- Release lever of the rear seat backrest: Removing and installing.
Upholstery and padding for head rest: removal and assembly3 pages
- Top Tether: Removing and installing.
Upholstery and padding for seat with integrated child seat18 pages
- Tools
- Assembly overview - cover and padding for seat with integrated child seat
Removing and installing cover and padding for seat with integrated child seat3 pages
- Assembly overview - seat base with integrated child seat
Dismantling and assembling seat base of integrated child seat3 pages
- Assembly overview - cover and padding for backrest with integrated child seat ? 12.02
Removing and installing cover and padding for backrest with integrated child seat ? 12.023 pages
- Assembly overview - cover and padding for backrest with integrated child seat 01.03 ?
Removing and installing cover and padding for backrest with integrated child seat 01.03 ?3 pages
- Conversion table by relevance
General body repairs, exterior226 pages
Body front15 pages
Lock carrier6 pages
Wing7 pages
Bonnet, flaps, cab, central locking21 pages
Front door, central locking41 pages
Front door23 pages
Central locking18 pages
- Tools
- Location overview - central locking components
- Removing and installing rear lid lock actuator
- Removing and installing actuator for fuel tank filler cap
Removing and installing batteries for key with remote control > 04.013 pages
Removing and installing batteries for key with remote control (folding type) 05.01 >3 pages
- Adapting (synchronising) keys with remote control > 04.01
Adapting keys 05.01 >3 pages
Rear door,sliding door,wing doors,central locking › Rear door18 pages
Sliding roof › Sunroof with glass panel19 pages
Bumper13 pages
Front bumper 06.00 >3 pages
Glazing/window mechanism52 pages
Flush bonded windows25 pages
- Tools
- Materials
- Repairing windscreen
- Assembly overview - windscreen
- Removing windscreen
- Assembly overview - rear window ? 05.00
- Removing undamaged rear window ? 05.00
- Assembly overview - rear window 06.00 ?
- Removing undamaged rear window 06.00 ?
- Removing broken rear window
- Installing rear window
- Preparing old undamaged window for glazing
Preparing new window for glazing3 pages
- Preparing body flange for glazing
- Installation instructions
- Minimum curing period
- Touching up paint damage
- Cleaning off excess adhesive sealing material
Windows having threaded connections3 pages
Door windows24 pages
- Assembly overview - front door window
Removing and installing window crank handle3 pages
- Removing front door window
- Adjusting front door window
- Assembly overview - rear door window
- Removing rear door window
- Adjusting rear door window
- Repairing electric window regulators
Electric window regulator with convenience function (automatic opening and closing) and force limitation mechanism3 pages
- Overcoming resistance with excess force limitation
Initialising and releasing automatic closing function3 pages
Exterior equipment47 pages
Wheel housing liner3 pages
Exterior mirror8 pages
Radiator grille6 pages
Mouldings and trims16 pages
Roof edge spoiler12 pages
Bodywork, Interior fitting work606 pages
Interior equipment105 pages
Interior mirror15 pages
- Removing and installing interior mirror with rain and light sensorG397
Bonding retaining plate for interior mirror with rain and light sensorG3976 pages
- Interior mirror main beam assist: Removing and installing
Rear view mirror13 pages
- Automatic anti-dazzle rear view mirror
- Automatic anti-dazzle rear view mirror: general installation diagram
Rear view mirror: Removing and fitting3 pages
Rear-view mirror fastening plate: removing and fitting3 pages
- Rear view mirror (with rain sensor): general installation diagram
Rear view mirror (with rain sensor): removing and fitting3 pages
Compartments, covers and trims23 pages
- Removing and installing centre console
- Removing and installing centre console extension
- Removing and installing centre armrest
- Removing and installing rear centre console trim
- Removing and installing switch unit holder, centre console
- Removing and installing cover for centre console
- Removing and installing side panel trims for footwell
- Removing and installing dash panel end trims
- Removing and installing trim for heating and air-conditioning control system
- Removing and installing trim strip with integrated warning light switchE3
- Removing and installing trim strip on driver's side
- Removing and installing light switchE1 trim
- Removing and installing vent trim, dash panel
- Removing and installing centre dash panel compartment
- Removing and installing steering column trim
- Removing and installing footwell cover
- Removing and installing storage tray in middle of dash panel
- Removing and installing spectacles holder in moulded headliner
- Removing and installing glove compartment
- Removing and installing sun visor
Compartments, linings and trims27 pages
- Central console accesories: general installation diagram
- Central console: general installation diagram
Central console: removing and fitting3 pages
Attachment frame with gearstick dust guard: removing and fitting3 pages
Hand grip for hand brake lever: removing and fitting3 pages
Driver side footwell cover: removing and fitting3 pages
Front passenger side footwell cover: removing and fitting3 pages
Central sunshade removing and fitting3 pages
Handgrips4 pages
Handgrip (roof): removing and fitting3 pages
Sill panel strips7 pages
Heel mouldings9 pages
- Footrest moulding (4 door vehicles): general installation diagram
Footrest moulding (4 door vehicles): removing and fitting3 pages
- Footrest moulding (2 door vehicles): general installation diagram
Footrest moulding (2 door vehicles): removing and fitting3 pages
interior floor carpet4 pages
Interior floor carpet removing and fitting3 pages
Passenger protection120 pages
Seat belts35 pages
- Safety regulations for seat belts fitted with tensioner
Belt pretensioner: check after an accident2 pages
- Front safety belt with tensioner (4 door vehicles): general installation diagram
Front safety belt with tensioner (4 door vehicles): removing and fitting3 pages
- Front safety belt with tensioner (2 door vehicles): general installation diagram
Front safety belt with tensioner (2 door vehicles): removing and fitting3 pages
- Vertical belt regulator: general installation diagram
Vertical belt regulator: removing and fitting3 pages
Front fitting (4 door vehicles): removing and fitting3 pages
Front fitting (2 door vehicles): removing and fitting3 pages
Front seat belt buckle: removing and fitting3 pages
- Rear seat belts: general installation diagram
- Side rear seat belt: general installation diagram
Side rear seat belt: removing and fitting3 pages
Central rear seat belt: removing and fitting2 pages
- Central rear seat belt: removing
- Central rear seat belt: removing
Abdominal belt and double lock: removing and fitting3 pages
Seat belts: Check10 pages
- Checkpoints
- Check seat belt webbing
Check the inertia reel device (locking effect)3 pages
- Make visual check of seat belt buckle
- Check working of seat belt buckle
- Check pillar loops and tongue connector
- Check anchorage points and components
Seat belts: testing10 pages
Airbag59 pages
- Airbag: general installation diagram
Safety precautions when working on the airbag system2 pages
- Checking airbag
Changing airbag units after an accident3 pages
- Airbag Unit driver side: general installation diagram
- Identification of driver Airbag modules
Airbag Unit driver side: removing and fitting7 pages
- Driver side Airbag unit, 1st Generation / Basic Wheel / Round register: removing
- Airbag driver side, 1st Generation. / Basic Steering wheel: fitting
- Airbag unit driver side, 2nd Generation / Basic multifunction Steering Wheel and Cupra / FR / Square register versions: removing
- Airbag unit driver side, 2nd Generation / Basic multifunction Steering Wheel and Cupra / FR versions: installing
- Driver side Airbag unit, 3rd Generation / Basic multifunction Wheel/ Round register: removing
- Airbag Unit driver side, 3rd Generation. / Multifunction Steering Wheel. : installing
Recoil ring with friction ring: Removing and fitting3 pages
- Airbag passenger side: general installation diagram
Airbag passenger side: removing and fitting3 pages
Warning light ?AIRBAG OFF?: Removing and fitting3 pages
Passenger airbag key switch: removing and fitting3 pages
Passenger airbag key switch lock cylinder: removing and fitting3 pages
Airbag control unit J234 : Removing and fitting3 pages
- Head airbag: general fitting notes (2 door vehicles)
Head airbag: Removal and fitting (2-door vehicles)3 pages
- Head airbag: general fitting notes (4 door vehicles)
Head airbag: Removal and fitting (4-door vehicles)3 pages
- Side impact airbag, driver/passenger: general installation diagram
Side impact airbag, driver/passenger: removing and fitting3 pages
- Side impact airbag sensor for driver/passenger: general installation diagram
Side impact airbag sensor for driver/passenger: removing and fitting3 pages
- Rear side impact sensor: general installation diagram
Rear side impact sensor: removing and fitting3 pages
Crash sensors6 pages
Trim, noise insulation214 pages
Instrument panel4 pages
Instrument panel: removing and fitting3 pages
Cross piece5 pages
Cross piece: removing and installing4 pages
Transverse support11 pages
- Transverse support: general installation diagram
Transverse support: Removing and fitting3 pages
Steering column support unit: removing and fitting3 pages
Door trims7 pages
Front door lining13 pages
- Front door lining, driver's side: general installation diagram
Front door lining, driver's side: removing and fitting3 pages
- Front door lining, front passenger side: general installation diagram
Front door lining, front passenger side: removing and fiting3 pages
- Rear door trim: general installation diagram
Rear door trim: Removing and installing3 pages
Pillar trims11 pages
- Removing and installing upper A-pillar trims
- Removing and installing lower A-pillar trims
- Detaching and attaching upper B-pillar trims
- Removing and installing upper B-pillar trims
- Removing and installing lower B-pillar trims
- Releasing and securing C-pillar trims
- Removing and installing C-pillar trims
- Removing and installing D-pillar trims
Door lining20 pages
Front door lining, driver's side: removing and assembly4 pages
Front door lining, passenger side: removing and assembly4 pages
Rear door trim with power windows, removing and installing4 pages
Rear door trim with mechanical window lifters, removing and installing4 pages
Strut linings and side linings43 pages
- Upper lining strut A: general installation diagram
Upper lining strut A: removing and installing3 pages
Lower lining of the strut A: removing and installing3 pages
- Upper lining strut B (4 door vehicles): general installation diagram
Upper lining strut B (4 door vehicles): removing and installing3 pages
- Upper lining strut B (2 door vehicles): general installation diagram
Upper lining strut B (2 door vehicles): removing and installing3 pages
- Side lining (2 door vehicles): general installation diagram
Side lining (2 door vehicles): removing and installing3 pages
- Lower lining of strut B: general installation diagram
Lower lining of strut B: removing and fitting3 pages
- Upper lining strut C (Ibiza, 2 door vehicles): general installation diagram
Upper lining strut C (Ibiza, 2 door vehicles): removing and fitting3 pages
- Upper lining strut C (Ibiza, 4 door vehicles): general installation diagram
Upper lining strut C (Ibiza, 4 door vehicles): removing and fitting3 pages
- Upper lining of strut C (Cordoba): general installation diagram
Upper lining of strut C (Cordoba): removing and fitting3 pages
- Lower lining strut C: general installation diagram
Lower lining strut C: removing and fitting3 pages
Roof upper crosspiece lining: removing and fitting3 pages
Luggage compartment trim28 pages
Side trim of the luggage compartment: removing and installing4 pages
Removing and inserting side trim grille3 pages
Rear parcel shelf, removing and installing4 pages
Protective guide for tailgate gas damper, removal and fitting4 pages
Rear lock carrier cover, removing and installing4 pages
Tailgate trim, removing and installing4 pages
Tailgate frame lining: removal and fitting4 pages
Boot linings33 pages
- Rear lock carrier cover (Ibiza): general installation diagram
Rear lock carrier cover lining (Ibiza): removing and fitting3 pages
- Rear lock carrier cover (Cordoba): general installation diagram
Rear lock carrier cover (Cordoba): removing and fitting3 pages
- Boot side lining (Ibiza): general installation diagram
Boot side lining (Ibiza): removing and fitting3 pages
- Boot side lining (Cordoba): general installation diagram
Boot side lining (Cordoba): removing and fitting3 pages
- Rear tray support (Ibiza): general installation diagram
Rear tray support (Ibiza): removing and fittinging3 pages
- Object tray (Cordoba): general installation diagram
Object tray (Cordoba): removing and fitting3 pages
- Tailgate lining (Ibiza): general installation diagram
Tailgate lining (Ibiza): removing and fitting3 pages
- Linings of rear bonnet (Cordoba): general installation diagram
Linings of rear bonnet (Cordoba): removing and fitting3 pages
Luggage compartment trims7 pages
Headliner9 pages
Roof lining8 pages
- Interior roof: general installation diagram
Interior moulded roof: removing and fitting3 pages
Interior roof moulding with sun roof/deflector: removing and fitting3 pages
Seat frames105 pages
Front seats14 pages
Front seat: Removing and installing4 pages
Foldaway table, removing and installing3 pages
Front seat back: removing and installing3 pages
Head restraint guide, removing and installing3 pages
Rear seats16 pages
- Front seat: general installation diagram
- Front seat backrest: general installation diagram
Front seat backrest: removing and fitting3 pages
- Seat back frame: general installation diagram
Seatrest locking control wire: removing and fitting3 pages
Front seats, general11 pages
- Tools
- Removing and installing seat
- Removing and installing trim on tunnel side
- Removing and installing backrest adjustment wheel
- Removing and installing drawer mounting
- Removing and installing heated front seats control unitJ774
- Removing and installing lumbar adjustment lever
- Removing and installing backrest folding table
- Removing head restraint guides
- Removing and installing backrest
Front seat trims16 pages
- Seat trim with drawer cover: general installation diagram
Seat trim with drawer cover: removing and fitting3 pages
- Seat trim with drawer: general installation diagram
Seat trim with drawer: removing and fitting3 pages
- Seat trim without height control element: general installation diagram
Seat trim without height control element: removing and fitting3 pages
Seat height adjustment element: Removing and fitting3 pages
Front seats with manual height adjustment7 pages
Front passenger seat without height adjustment3 pages
Front passenger seat with through-loading aperture7 pages
Driver seat, electrically adjustable10 pages
- Tools
- Removing and installing trim on sill side
- Removing and installing switches
- Removing and installing trim bracket on sill side
- Removing and installing seat longitudinal adjustment
- Removing and installing backrest adjustment drive
- Removing and installing inclination adjustment drive
- Removing and installing height adjustment drive
- Removing and installing lumbar support (4-way, electric)
Seats, 2nd row11 pages
- Tools
- Removing and installing seat
- Removing and installing front trim
- Removing and installing side trim
- Removing and installing footwell trim
- Removing and installing operating levers for backrest adjustment and seat longitudinal adjustment
- Removing and installing
- Removing and installing trim of backrest operating lever
- Removing and installing backrest cover panel
- Removing and installing Bowden cable for operating backrest
Seats, 3rd row10 pages
- Tools
- Removing and installing seat
- Removing and installing backrest mechanism trim
- Removing and installing side seat frame trim
- Removing and installing seat frame stop buffer
- Removing and installing backrest release loop
- Removing and installing backrest
- Removing and installing backrest cover panel
- Removing and installing seat cushions
Seat padding, covers62 pages
Front seat upholstery and padding7 pages
Upholstery and padding for the front seat benches: removing and fitting3 pages
Upholstery and padding for front seat backrest: removing and fitting3 pages
Front seat covers and padding4 pages
Seat heating elements7 pages
Seat heating element: removing and fitting3 pages
Backrest heating element: Removing and fitting3 pages
Second row seat covers and padding4 pages
Upholstery and padding for rear seats, general installation overview8 pages
- Upholstery and padding for the rear seats - Assembly overview
Upholstery and padding for the rear seat bench, removal and installation3 pages
Upholstery and padding for seat back: removal and assembly3 pages
Rear seat upholstery and padding12 pages
- Upholstery and padding for the rear seat bench: general installation diagram
Upholstery and padding for the rear seat bench: removing and fitting3 pages
- Upholstery and padding for back seat backrest (parted): general installation diagram
Upholstery and padding for back seat backrest (parted): removing and fitting3 pages
Rear backrests lock: removing and fitting3 pages
Third row seat covers and padding4 pages
Upholstery and padding for the adjustable rear seats14 pages
- Upholstery and padding for the rear seat bench, removal and installation
- Upholstery and padding for the adjustable rear seats - Assembly overview
Upholstery and padding for the rear seat bench, removal and installation2 pages
Upholstery and padding for seat back: removal and assembly3 pages
Centre armrest / luggage compartment flap unit, removing and installing3 pages
Upholstery and padding for centre armrest / luggage compartment flap unit, removing and installing3 pages
- Conversion table by relevance
- Table of equivalences according to applicability
Body, exterior assembly work379 pages
Body front35 pages
Lock carrier:8 pages
Front wing8 pages
Underbody protection19 pages
- Underbody protection - Assembly overview
Centre sound proofing (diesel engines) removing and fitting3 pages
Centre sound proofing (petrol engines) removing and fitting3 pages
Underbody protection disassembly and assembly3 pages
- Front wheel housing - general assembly overview
Front wheel moulding removing and fitting3 pages
- Rear wheel moulding - general assembly overview
Removing and installing wheel housing liner (rear)3 pages
Bonnet, flaps, cab, central locking71 pages
Bonnet18 pages
- Bonnet: Assembly overview
- Bonnet - adjustment
Grille below windscreen - disassembly and assembly3 pages
Removing and installing plenum chamber cover3 pages
Bonnet soundproofing - removing and installing3 pages
Locking elements16 pages
- Locking components - Assembly overview
Retention hook - removing and installation3 pages
- Adjust the retention hook
- Adjust the bonnet lock
Control lever - removing and installing3 pages
Rear lid32 pages
- Tailgate: Assembly overview
- Removing gas from gas shock absorber
Tailgate hinges - removing and installing3 pages
- Slip plate - adjusting
- Adjusting tailgate
- Adjusting buffers
- Tailgate lock - Assembly overview
Bracket of the handle unit - Removing and installing3 pages
Locking mechanism of the tailgate - Removing and installing3 pages
- Tailgate seal - Assembly overview
Remove and install the tailgate seal3 pages
Filler cap set5 pages
Removing and installing tank flap unit3 pages
- Fuel tank flap unit for LPG vehicles: replace
Front door, central locking48 pages
Front door18 pages
- Front doors - Installation overview
Front door - removing and installing4 pages
- Front door hinges - assembly overview
Front door hinges - removing and assembly3 pages
- Front door - adjusting
- Subframe lining - assembly overview
Subframe lining - removal and assembly3 pages
Inside profile on the perimeter of the front door - removing and assembly3 pages
Locking elements16 pages
- Door handle and door lock - exploded view
Handle assembly and lock cylinder housing - removing and installing3 pages
Removing and installing lock cylinder housing3 pages
Door handle: Removing and installing4 pages
Front door lock - removing and assembly4 pages
Central locking7 pages
- Central locking - Assembly overview
Adjusting the key using a remote control2 pages
Convenience system for electric windows in the door7 pages
Rear door,sliding door,wing doors,central locking38 pages
Rear door22 pages
- Rear door - Assembly overview
Rear door - removing and installing4 pages
- Rear door hinges - Assembly overview
Rear door hinges - removing and assembly3 pages
- Adjusting rear door
- Subframe lining - assembly overview
Subframe lining - removal and assembly3 pages
Inside profile on the perimeter of the rear door - removing and assembly3 pages
- Window frame - Assembly overview
Locking elements16 pages
- Door handle and door lock - exploded view
Handle assembly and lock cylinder housing - removing and installing3 pages
Removing and installing lock cylinder housing3 pages
Door handle: Removing and installing4 pages
Rear door lock - removing and assembly4 pages
Sliding roof › Sunroof29 pages
- Operation
- Sliding/tilting sunroof - exploded view
Removing and installing glass sunroof cover4 pages
- Adjusting sliding/tilting sunroof panel
- Adjust glass cover parallel running
- Adjusting cover joint
- Cover joint: replacement
Removing and installing wind deflector3 pages
Removing and installing the roof trim for the sliding/tilting sunroof (sunshade)3 pages
Sunroof drive motor - removing and fitting3 pages
- Sunroof drive motor - adjustment (zero position)
Pre-selection control for sliding/tilting sunroof - removing and installing3 pages
Removing and installing sliding/tilting sunroof frame3 pages
- Emergency manual operation
- Drain hoses: cleaning
Bumper › Bumper trim43 pages
- Trim of the front bumper (Altea XL Freetrack) - Assembly overview
- Trim of the front bumper (Altea XL) - Assembly overview
- Front bumper trim, Altea XL 2009: General assembly overview
Front bumper cover, removing and installing3 pages
Sensor for front parking aid: Removing and installing3 pages
Removing and installing front cross member3 pages
Upper radiator grille in the bumper trim: Removing and installing3 pages
Perimeter of the radiator grille - removal and assembly3 pages
Removing and installing the bottom cover of the bumper trim3 pages
Removing and installing the bottom grille of the bumper trim3 pages
Lower grille in the bumper trim of the Altea XL 2009: Removing and installing3 pages
- Trim of the rear bumper (Altea XL Freetrack) - Assembly overview
- Trim of the rear bumper (Altea XL) - Assembly overview
Rear bumper trim, removing and installing3 pages
Remove and install the lower cover of the rear bumper trim3 pages
- Cross-member and rear panel - Assembly overview
Remove and install the cross-member and rear panel3 pages
Glazing/window mechanism58 pages
Glued windows34 pages
- Windscreen - exploded view
- Rain and light sensorG397 - Assembly overview
Removing and installing sensor for rain and light detectionG3973 pages
Rain and light recognition sensor holderG397 Removing and installing2 pages
- Rain and light recognition sensorG397 holder - assembly
- Rear window - Assembly overview
Removing and installing rear window4 pages
- Side window: Assembly overview
Preparing the window for installation4 pages
Drying or setting time3 pages
Screwed side windows4 pages
Removing and installing screwed side window3 pages
Front door window10 pages
- Front door window - Assembly overview
- Front door window - removing and assembly
- Synchronisation and storage of window course
- Automatic raising or lowering: Commissioning
- Window well seal outside the front door: Removing and installing
- Window well seal inside the front door: Removing and installing
- Front door window guide: Removing and installing
- Front door electric window motor: Removing and installing
- Front door electric window unit - removing and assembly
Rear door windows10 pages
- Rear door window - Assembly overview
- Rear door window - removing and assembly
- Synchronisation and storage of window course
- Automatic raising or lowering: Commissioning
- Window well seal outside the rear door: Removing and installing
- Window seal inside the rear door: Removing and installing
- Rear door window guide: Removing and installing
- Rear door electric window motor: Removing and installing
- Rear door window lifter unit: Removing and installing
Exterior equipment57 pages
Exterior mirror15 pages
- Electrically adjusted exterior mirrors - Assembly overview
Electrically adjusted exterior mirror - removing and installing3 pages
- Manually adjusted exterior mirror - Assembly overview
Manually adjusted exterior mirror - removal and installation3 pages
Exterior mirror glass - removal and installation3 pages
Removing and installing mirror housing3 pages
Top protective strips11 pages
- Top protective strips - Assembly overview
Engine bonnet strip - removing and installing3 pages
Removing and installing moulded part of the B-pillar3 pages
Removing and installing the door gutter moulding3 pages
Lower trim18 pages
- Lower trim - Assembly overview
Replace the front wing trim:3 pages
Replace the rear wing trim3 pages
- Skirt mouldings - Assembly overview
Heel cushion moulding: removing and fitting3 pages
Stickers7 pages
Removing and applying the stickers on the front wings3 pages
Removing and applying the tailgate stickers3 pages
Roof edging5 pages
- Equivalency table depending on applicability
Bodywork - Interior fitting work736 pages
Technical data › Technical data3 pages
Interior equipment73 pages
Interior mirror6 pages
Compartments, covers and trims56 pages
Removing and installing glove compartment3 pages
Glove compartment cover: removing and fitting3 pages
Driver's side cover: removing and fitting4 pages
Passenger side cover: removing and fitting4 pages
removing and installing the centre console4 pages
Fixing frame with gear lever boot: Removing and installing3 pages
Support for the central console cover: removing and fitting3 pages
Support for gear lever: Removing and installing3 pages
Hand grip for the hand brake lever, removing and installing3 pages
Central arm rest: removing and installing4 pages
Centre console frame: removing and fitting4 pages
Steering wheel column trim5 pages
Removing and fitting the sill panel strip4 pages
Grab handles4 pages
- Tools
- Removing and installing roof grab handles
- Holder of the second seat row roof handle: Removing and installing
- A-pillar handles: Removing and installing
- A-pillar handle holders: Removing and installing
Sill mouldings7 pages
Passenger protection165 pages
Seat belts24 pages
- Safety regulations for seat belts fitted with tensioner
Belt tensioner: checking after an accident2 pages
Front seat belt: Removing and installing4 pages
Height adjustment mechanism of front seat belt: Removing and installing4 pages
Front seat belt lock: Removing and installing3 pages
Rear seat belt: removing and fitting5 pages
Rear central seat belt unit: Removing and installing3 pages
Rear seat belt locks: removing and fitting3 pages
Safety regulations and test methods for pyrotechnic, electrical and mechanical components of the restraint system19 pages
- General safety regulations
- Disposal of pyrotechnic components of the restraint system
- Additional safety regulations for side airbag
- Additional safety regulations for curtain airbags
- Safety precautions for crash sensors (pressure sensors) for side airbag (front)
- Renewing pyrotechnic, electrical and mechanical components of the restraint system following an accident
- Checking airbag mounting components following an accident
- Accident in which airbag was not triggered
- Checking securing components and anchorage points following an accident
- Functional test of the child seat retaining function of the seat belt for additional child safety seats (not drivers seat belt)
- Testing of the child seat anchors (Isofix) after an accident
Seat belts: testing5 pages
- Points to check:
- Checking the belt fabric
- Visual inspection of the belt buckle
- Functional check of the belt buckle
- Checking the metal work and the insertion tongue
- Check securing components and anchorage points
Airbag55 pages
- Airbag: Assembly overview
Safety precautions when working on airbags2 pages
- Checking airbags
Changing airbag units after an accident2 pages
- Driver's side airbag unit, general installation overview
- Determination of driver airbag module
Removing and installing driver's airbag unit4 pages
- Airbag unit, driver?s side 1st generation / steering wheel basic version with and without multi-function elements / round openin
- Airbag unit, driver?s side 1st generation / steering wheel basic version with and without multi-function elements / round openin
- Airbag unit, driver?s side 2nd generation / steering wheel basic version with multi-function elements / square opening: removing
- Airbag unit, driver?s side 2 generation / steering wheel basic version with and without multi-function elements / square opening
Steering wheel: Removing and fitting1 page
- Steering wheel: removing
- Steering wheel: Install
Recoil ring with friction ring: Removing and fitting1 page
- Recoil ring with friction ring: removing
- Recoil ring with friction ring: Install
Airbag unit, passenger side: removing and fitting4 pages
Warning light ?AIRBAG OFF? removal and installation3 pages
Key switch for deactivating the passenger side airbagsE224: Removing and installing3 pages
Passenger airbag key switch lock cylinder: removing and installing3 pages
Airbag control unitJ234: removing and fitting3 pages
Curtain airbag ? 36.2007: Removing and installing4 pages
Curtain airbag 36.2007 ?: Removing and installing4 pages
Removing and installing side airbags on driver and front passenger sides4 pages
Side airbag - rear: removing and installing4 pages
Side impact airbag sensor, driver/passenger: removal and assembly4 pages
Rear side impact sensor: removal and assembly4 pages
- Deactivating the airbags
Anchorage safety of the child safety seats7 pages
ISOFIX-retainer on front seat: Removing and installing3 pages
Child safety seat retainer (Isofix, Top Tether) on rear seat: Removing and installing3 pages
Crash sensors5 pages
- Tools › Special tools, workshop equipment, testers, measuring instruments and other items required
- Removing and installing front airbag crash sensor, driver sideG283
- Removing and installing side airbag crash sensor, driver sideG179
- Side airbag crash sensor on front passenger sideG180
- Removing and installing rear side airbag crash sensor, driver sideG256
- Removing and installing rear side airbag crash sensor, front passenger sideG257
Servicing airbags37 pages
- Overview of fitting locations
- Airbag control unit (-J234-): Assembly overview
Removing and installing airbag control unit - J?234 -3 pages
- Steering wheel airbag: Assembly overview
Steering wheel airbag: Removing and installing3 pages
Removing and installing return spring with slip ring3 pages
- Driver?s side knee airbag: Assembly overview
Driver?s side knee airbag: Removing and installing3 pages
- Passenger airbag: Assembly overview
Removing and installing front passenger's airbag3 pages
Removing and installing key-operated switch to deactivate airbag on front passenger side3 pages
Warning lamp ?PASSENGER AIRBAG OFF?: Removing and installing3 pages
Removing and installing side airbags on driver and front passenger sides3 pages
- Side airbag - rear: Assembly overview
- Removing and installing side airbag (rear)
- Curtain airbag: Assembly overview
Curtain airbag: Removing and installing3 pages
- Deactivating the airbags
Crash sensors for airbags13 pages
- Crash sensor for front airbag: Assembly overview
Removing and installing crash sensor for front airbags3 pages
- Crash sensor for side airbag (front): Assembly overview
Crash sensor for side airbag (front): Removing and installing3 pages
- Crash sensor for side airbag (rear): Assembly overview
Crash sensor for side airbag (rear): Removing and installing3 pages
Trim, noise insulation249 pages
Front door trim22 pages
- Overview of fitting locations
- Front door trim: Assembly overview
Front door trim: Removing and installing3 pages
Removing and installing window regulator switch3 pages
- Overview over the cable wiring in the door panelling
Warning lamp for open door and footwell lighting: Removing and installing3 pages
Interior door handle: Removing and installing3 pages
Dash panel › Removing and installing dash panel2 pages
Rear door trim:22 pages
- Installation location overview
- Trim of the rear doors: Assembly overview
Trim of the rear doors: Removing and installing.3 pages
Removing and installing window regulator switch3 pages
- Overview over the cable wiring in the door panelling
Removing and installing door warning light3 pages
Removing and installing treble loudspeaker3 pages
Removing and installing interior door handle3 pages
Door trims2 pages
- Tools › Special tools, workshop equipment, testers, measuring instruments and other items required
- Removing and installing door trim at front
- Removing and installing cover for mirror triangle
- Removing and installing sliding door trim
- Sun blind in the sliding door: Removing and installing
Cross member5 pages
Cross member: dismounting and assembly4 pages
Door trim (rear)22 pages
- Overview of fitting locations
- Rear door trim: Assembly overview
Rear door trim: Removing and installing3 pages
Removing and installing window regulator switch3 pages
- Overview over the cable wiring in the door panelling
Warning lamp for open door: Removing and installing3 pages
Interior door handle: Removing and installing3 pages
Pillar trims1 page
- Tools › Special tools, workshop equipment, testers, measuring instruments and other items required
- Removing and installing upper A-pillar trims
- Removing and installing lower A-pillar trims
- Detaching and attaching upper B-pillar trims
- Removing and installing upper B-pillar trims
- Removing and installing lower B-pillar trims
- Releasing and securing C-pillar trims
- Removing and installing C-pillar trims
- Removing and installing D-pillar trims
Door linings20 pages
Front door lining, driver's side: removing and assembly4 pages
Front door lining, passenger side: removing and assembly4 pages
Rear door trim with electric windows: Removing and installing4 pages
Rear door trim with mechanical window raiser: Removing and installing4 pages
Central tube5 pages
- Central tube: Assembly overview
Removing and installing central tube for dash panel3 pages
Strut linings and side linings33 pages
Upper A-pillar trim: removing and fitting4 pages
Lower C-pillar trim, removing and installing3 pages
Window triangle lining: dismounting and assembly3 pages
Footwell lining: removal and installing3 pages
Upper B-pillar trim: removing and fitting4 pages
Lower B-pillar trim, removing and installing4 pages
Upper C-pillar trim: removing and fitting4 pages
Upper C-pillar trim (without airbag): removing and fitting4 pages
Lower C-pillar trim (with airbag): removing and fitting4 pages
Roof trims17 pages
- Roof lining overview
- Sunshade: Assembly overview
- Removing and installing sun visor
- Removing and installing centre bracket for sun visor
Removing and installing sun visor (centre)3 pages
- Headliner: Assembly overview
- Cable running on the backside of the roof lining
- Attaching roof reinforcement to body - vehicles without sliding sunroof
- Attaching roof reinforcement to body - vehicles with sunroof
Luggage compartment trims1 page
- Tools › Special tools, workshop equipment, testers, measuring instruments and other items required
- Removing and installing lock carrier cover
- Removing and installing side panel trims for luggage compartment
- Removing and installing luggage compartment floor (5-seater)
- Removing and installing luggage compartment floor support (5-seater)
Luggage compartment lining24 pages
Side-mounted luggage compartment trim: removing and fitting4 pages
Side-mounted trim grille: remove and fit3 pages
Rear shelf support: removing and fitting4 pages
Rear lock carrier cover: removing and fitting4 pages
Tailgate trim: removing and fitting4 pages
Tailgate frame trim: removing and fitting4 pages
Passenger compartment trim38 pages
- Passenger compartment trims: Assembly overview
- Upper A-pillar trim: Assembly overview
Strut A upper lining: removal and fitting3 pages
- Lower A-pillar trim: Assembly overview
Lower A-pillar trim: Removing and installing3 pages
- Profile element: Assembly overview
Removing and installing connecting piece3 pages
- Foot rest and bracket of the foot rest: Assembly overview
Removing and installing foot rest bracket3 pages
Removing and installing operating lever for bonnet cable3 pages
- Upper B-pillar trim: Assembly overview
- Upper B-pillar trim: Removing and installing
- B-pillar lower trim assembly overview
- Lower B-pillar trim: Removing and installing
- Roof end trim: Assembly overview
- Roof end trim: Removing and installing
Rear wheel housing liner: Removing and installing3 pages
- C-pillar trim: Assembly overview
- C-pillar trim: Removing and installing
- D-pillar trim: Assembly overview
- Removing and installing the D-pillar trim
- Removing and installing floor covering
Roof lining8 pages
- Roof lining: general overview
- Sunroof lining: general overview
Sliding / tilting sunroof trim: Removing and installing3 pages
Luggage compartment trim22 pages
- Luggage compartment trim: Assembly overview
- Luggage compartment end trim: Assembly overview
Removing and installing rear cross panel trim3 pages
- Left side trim: Assembly overview
- Removing and installing side trim (left-side)
- Right side trim: Assembly overview
- Removing and installing side trim (right-side)
- Rear lid trim: Assembly overview
- Rear lid bottom trim: Assembly overview
Rear lid bottom trim: Removing and installing3 pages
- Tailgate locking mechanism lining: Removing and installing
- Tail light lid: Removing and installing
- Top rear lid trim: Assembly overview
- Top rear lid trim: Removing and installing
- Load guard: Assembly overview
- Load guard: Removing and installing
- Mounting bracket for load guard: Removing and installing
- Loading space with cover strip: Assembly overview (equipment version)
Seat frames190 pages
Front seats, general3 pages
- Tools
- Removing and installing seat
- Removing and installing trim on tunnel side
- Seat backrest adjustment wheel: Removing and installing
- Removing and installing drawer mounting
- Removing and installing heated front seats control unitJ774
- Adjustment lever of the lumbar support: Removing and installing
- Removing and installing backrest folding table
- Headrest guide: removing
- Removing and installing backrest
Front seats6 pages
- Front seat: Assembly overview
- Front seat: Removing and installing
- Front seat back: removing and installing
- Foldaway table: Removing and installing
- Head restraint guide: Removing and installing
- Compartment with lock: Removing and installing
- Left cover: Removing and installing
- Knob of the actuating lever for the seat height adjustment: Removing and installing
- Seat height adjustment element: removal and assembly
- Backrest grille: Removing and installing
Front seat with manual adjustment58 pages
- Front seat with manual adjustment: Assembly overview
Front seat with manual adjustment: Removing and installing3 pages
- Modular wiring guide: Assembly overview
Modular wiring routing using a corrugated tube on the front seat: Removing and installing3 pages
- Connectors: Assembly overview
- Connector point connectors
Airbag adapterVAS 6036: Connecting and removing3 pages
Front seat back: removing and installing3 pages
Removing and installing seat rail covers3 pages
Removing and installing backrest adjuster3 pages
Removing and installing seat height adjuster3 pages
Removing and installing assembly cover3 pages
Removing and installing side trim (sill end)3 pages
Removing and installing side trim (tunnel end)3 pages
Retaining bracket for trim on rocker panel side: Removing and installing3 pages
Seat height adjustment lever: Removing and installing3 pages
- Tray compartment: Assembly overview
Removing and installing storage compartment3 pages
- Tray compartment components: Assembly overview
- Storage compartment: Disassembling and assembling
Frame for manual lumbar support: Removing and installing3 pages
Head restraint guides: Removing and installing3 pages
Head restraints, front seat with manual adjustment: Assembly overview2 pages
Footwell light: Removing and installing3 pages
Front seats with manual height adjustment3 pages
- Tools
- Removing and installing trim on sill side
- Removing and installing trim bracket on sill side
- Height adjustment lever: Removing and installing
- Height adjustment element: Removing and installing
- Lumbar support (manual, 2 possible positions): Removing and installing
Rear seats11 pages
- Rear seat: Assembly overview
- Rear seat 1/3 section, right side: Removing and installing
- Rear seat 2/3 section, left side: Removing and installing
- Head restraint guide of the rear seat 1/3 section, right side: Removing and installing
- Head restraint guide of the rear seat 2/3 section, left side: Removing and installing
- Movable seat: Removing and installing
- Adjustment trim for rear seat back: Removing and installing
- Lever for the rear seat bench longitudinal adjustment: Removing and installing
- Removing and installing the seat rails
- Bowden cable of the rear seat 1/3 section, right side: Removing and installing
- Bowden cable of the rear seat 2/3 section, left side: Removing and installing
Front passenger seat without height adjustment0 pages
- Tools
- Removing and installing trim on sill side
Front seat with electric seat adjustment96 pages
- Front seat with electric seat adjustment: Assembly overview
- Front seat with electric seat adjustment: Removing and installing
Front seat with electric adjustment without error: Removing and installing3 pages
Front seat with electric adjustment with error: Removing and installing3 pages
- Modular wiring guide: Assembly overview
Modular wiring routing using a corrugated tube on the front seat: Removing and installing3 pages
- Connectors: Assembly overview
- Connector point connectors
Airbag adapterVAS 6036: Connecting and removing3 pages
Front seat back: removing and installing3 pages
- Seat shell: Assembly overview
Upper seat frame shell: Removing and installing3 pages
Lower seat frame shell: Removing and installing3 pages
Removing and installing spring mat with wiring harness for seat pan3 pages
Removing and installing seat rail covers3 pages
- Exploded view of trim (sill end and tunnel end) Assembly overview
Removing and installing assembly cover3 pages
Trim (front, sill end): Removing and installing3 pages
Trim (rear, sill end): Removing and installing3 pages
Removing and installing side trim (tunnel end)3 pages
- Retaining bracket for trims on rocker panel side: Assembly overview
Removing and installing retaining clip (front)3 pages
Retaining clip rear: Removing and installing3 pages
Removing and installing retaining clip (top)3 pages
Removing and installing seat adjustment switch3 pages
Switch for 4-way lumbar support: Removing and installing3 pages
Airbag control for seat memory: Removing and installing3 pages
- Motor for seat adjustment: Assembly overview
Seat longitudinal adjustment motor: Removing and installing2 pages
- Seat longitudinal adjustment motor: removing
- Seat longitudinal adjustment motor: removing
Removing and installing seat height adjustment motor3 pages
Removing and installing seat rake adjustment motor3 pages
Removing and installing backrest adjustment motor3 pages
- 4-way lumbar support: Assembly overview
4-way lumbar support: Removing and installing3 pages
Removing and installing footwell light3 pages
- Line assignment for bench seat: Assembly overview
- Seat backrest wiring harness: Assembly overview
- Tray compartment: Assembly overview
Removing and installing storage compartment3 pages
- Tray compartment components: Assembly overview
- Storage compartment: Disassembling and assembling
Head restraint guides: Removing and installing3 pages
Fold-over passenger seat for transporting longer objects7 pages
- Removing and installing trim on sill side
- Removing and installing trim bracket on sill side
- Height adjustment lever: Removing and installing
- Height adjustment element: Removing and installing
- Lumbar support (manual, 2 possible positions): Removing and installing
- Release unit of the folding backrest: Removing and installing
Driver seat, electrically adjustable4 pages
- Tools
- Removing and installing trim on sill side
- Removing and installing switches
- Removing and installing trim bracket on sill side
- Removing and installing seat longitudinal adjustment
- Seat backrest adjustment drive: Removing and installing
- Rake adjustment drive: Removing and installing
- Height adjustment drive: Removing and installing
- Lumbar support (electric, 4 possible positions): Removing and installing
Seats, 2nd row2 pages
- Tools
- Removing and installing seat
- Removing and installing front trim
- Removing and installing side trim
- Footwell trims: Removing and installing
- Operating lever for seat backrest adjustment and seat longitudinal adjustment: Removing and installing
- Removing and installing
- Removing and installing trim of backrest operating lever
- Removing and installing backrest cover panel
- Removing and installing Bowden cable for operating backrest
Seats, 3rd row0 pages
- Tools
- Removing and installing seat
- Removing and installing backrest mechanism trim
- Removing and installing side seat frame trim
- Removing and installing seat frame stop buffer
- Removing and installing backrest release loop
- Removing and installing backrest
- Removing and installing backrest cover panel
- Removing and installing seat cushions
Seat padding, covers56 pages
Front seat upholstery and padding6 pages
- Front seat upholstery and padding: Assembly overview
- Front seat upholstery and padding: Removing and installing
- Heating element for the front seat: replace
- Upholstery and padding for front seat back: removal and assembly
- Heating element for the front seat backrest: replace
- Upholstery and padding for head rest: removal and assembly
Front seat covers and padding14 pages
- Front seat covers and padding with manual adjustment: Assembly overview
- Front seat covers and padding with electric adjustment: Assembly overview
Cover and padding for seat bench: Removing and installing3 pages
Cover and padding for the backrest: Removing and installing3 pages
Cover and padding of the head restraint with slide-in locking mechanism: Removing and installing3 pages
Head restraint guides: Removing and installing3 pages
Second row seat covers and padding4 pages
- Tools
- Removing and installing seat cushion cover and padding
- Cover and padding for seat bench with integrated child seat: Removing and installing
- Removing and installing push button with trim for adjusting mechanism of child seat
- Seat frame spacer with integrated child seat: Removing and installing
- Cover and padding for the backrest: Removing and installing
Upholstery and padding for rear seats, general installation overview7 pages
- Upholstery and padding for rear seats: Assembly overview
- Seat covers and padding: Removing and installing
- Covers and padding for movable seat: Removing and installing
- Cover and padding for rear seat backrest: Removing and installing
- Covers and padding for movable seat backrest: Removing and installing
- Unit comprising load-through hatch / centre armrest: Removing and installing
- Upholstery and padding for load-through hatch / centre armrest unit: Removing and installing
Padding and cover for rear bench seat16 pages
- Rear seats: Assembly overview
- Rear seat cover and padding: Removing and installing
- Removing and installing the cover of the rear seat backrest 1/3, left-side
- Removing and installing the cover of the rear seat backrest 2/3, right-side
- Items to be checked following complete assembly of backrest
- Lock cylinder: Assembly overview
- Removing and installing the rear seat backrest head restraint guide 1/3, left-side
- Removing and installing the rear seat middle backrest head restraint guide 2/3, right-side
- Removing and installing the rear seat backrest head restraint guide on the side 2/3, right-side
- Frame for the load-through hatch: Removing and installing
- Load-through hatch: Removing and installing
- Cover for load-through hatch: cut-out
- Equivalency table depending on applicability
Seat heater element7 pages
Seat heating elements: Removing and installing3 pages
Removing and installing heater element for backrest3 pages
Third row seat covers and padding1 page
- Tools
- Removing and installing seat cushion cover and padding
- Cover and padding for the backrest: Removing and installing
Bodywork, exterior installation work1,257 pages
Body front105 pages
Front bodywork section19 pages
Lock carrier12 pages
Lock carrier:5 pages
Wing5 pages
- Assembly overview - wing
Removing and installing wing3 pages
Wing panel7 pages
Front wing9 pages
- Plenum chamber bulkhead
Centre sound proofing9 pages
- Centre sound proofing - installation overview
Removing and installing centre soundproofing3 pages
- Underbody protection - Assembly overview
Underbody lining: disassembly and assembly3 pages
Underbody protection19 pages
- Underbody protection - Assembly overview
Centre sound proofing (diesel engines) removing and fitting3 pages
Centre sound proofing (petrol engines) removing and fitting3 pages
Underbody protection disassembly and assembly3 pages
- Front wheel housing - general assembly overview
Front wheel moulding removing and fitting3 pages
- Rear wheel moulding - general assembly overview
Removing and installing wheel housing liner (rear)3 pages
Plenum chamber cover4 pages
Trim on underbody4 pages
Bonnet, flaps, cab, central locking141 pages
Bonnet32 pages
- Bonnet - installation overview
- Adjusting bonnet
Removing and installing hinges for bonnet3 pages
Grille below windscreen - disassembly and assembly3 pages
Removing and installing plenum chamber cover3 pages
Water box soundproofing: removing and installing3 pages
Air inlet cover: removing and installing3 pages
Bonnet soundproofing - removing and installing3 pages
- Control cable - installation overview
Control lever - removing and installing3 pages
- Bonnet catch - installation overview
Tailgate, Cordoba14 pages
- Tailgate - installation overview
- Gas damper: removing
- Gas damper: venting
Tailgate hinges: removing and installing3 pages
- Tailgate catch: removing and installing
Locking elements16 pages
- Locking components - Assembly overview
Retention hook - removing and installation3 pages
- Adjust the retention hook
Bonnet catch - removing and installing3 pages
- Adjust the bonnet lock
Control lever - removing and installing3 pages
Ibiza rear hatch14 pages
- Luggage compartment lid - Assembly overview
- Gas damper: removing
- Gas damper: venting
Tailgate hinges: removing and installing3 pages
- Tailgate lock - Assembly overview
Rear lid32 pages
- Tailgate: Assembly overview
- Tailgate Altea 2009: General assembly overview
Gas shock absorber Altea 2009 - removing and installing3 pages
- Removing gas from gas shock absorber
Tailgate hinges - removing and installing3 pages
- Slip plate - adjusting
- Adjusting tailgate
- Adjusting buffers
- Tailgate lock - Assembly overview
Bracket of the handle unit - Removing and installing3 pages
Locking mechanism of the tailgate - Removing and installing3 pages
Hatch Exeo ST 200918 pages
- Tailgate Exeo ST 2009: Assembly overview
Tailgate Exeo ST 2009: Removing and installing3 pages
- Tailgate Exeo ST 2009: adjustment
Tailgate hinges Exeo ST 2009: Removing and installing3 pages
Door lock safety catch Exeo ST 2009: Removing and installing3 pages
Gas struts Exeo ST 2009: Removing and installing3 pages
- Removing gas from gas shock absorber
- Tailgate seal Exeo ST 2009: Removing and installing
- Tolerances, rear
Filler cap set5 pages
Removing and installing tank flap unit3 pages
- Fuel tank flap unit for LPG vehicles: replace
Tank flap unit5 pages
- Filler neck compartment lid: Assembly overview
Tank filler flap locking motorV155: Removing and installing3 pages
Fuel flap unit5 pages
- Fuel flap unit - installation overview
Removing and installing tank flap unit3 pages
Front door, central locking118 pages
Door7 pages
Front door26 pages
- Front doors - Installation overview
- Front door hinges - assembly overview
Front door hinges - removing and assembly3 pages
- Front door - adjusting
- Door handle and door lock - exploded view
Removing and installing lock cylinder housing3 pages
Front door lock: removing and assembly2 pages
- Interior door handle - removing and installing
Removing and installing locking knob for locking rod5 pages
- Door seals - Installation overview
Components19 pages
Assembly overview - components4 pages
- Assembly overview - door handle and door lock
Removing and installing components4 pages
- Removing and installing door lock
Locking elements16 pages
- Door handle and door lock - exploded view
Handle assembly and lock cylinder housing - removing and installing3 pages
Removing and installing lock cylinder housing3 pages
Door handle: Removing and installing4 pages
Front door lock - removing and assembly4 pages
Central locking6 pages
- Central locking components: installation overview
- Adjusting keys using the radio remote control
Battery for key with radio remote control - removing and installing0 pages
- Removing
- Fitting
Door components33 pages
Seals on front door3 pages
Convenience system for electric windows in the door8 pages
Rear door,sliding door,wing doors,central locking210 pages
Sliding door86 pages
- Tools
- Assembly overview - sliding door roller guides
Removing and installing door arrester and end plate for lower guide rail3 pages
Removing and installing locking pegs and catch plates4 pages
- Removing and installing striker plate
- Assembly overview - sliding door locking and release components
Removing and installing retaining strip for cover5 pages
Removing and installing protective strip5 pages
- Removal and installation of door inner seals
- Removing and installing door seal
- Assembly overview - insulation
Rear door18 pages
Locking elements16 pages
- Door handle and door lock - exploded view
Handle assembly and lock cylinder housing - removing and installing3 pages
Removing and installing lock cylinder housing3 pages
Door handle: Removing and installing4 pages
Rear door lock - removing and assembly4 pages
Electrically operated sliding door90 pages
- Tools
- Assembly overview - sliding door roller guides
Removing and installing locking pegs and catch plates4 pages
- Removing and installing striker plate
- Assembly overview - sliding door locking and release components
Removing and installing cover1 page
- Tools
- Removal:
- Installation
- Removing and installing sliding door control unit
- Basic setting of the sliding door electronics
- Customer service mode
Removing and installing retaining strip for cover5 pages
Removing and installing protective strip5 pages
- Removal and installation of door inner seals
Removing and installing door seal with sensor strip4 pages
- Assembly overview - insulation
Sliding roof121 pages
Servicing sliding/tilting sunroof12 pages
- Engine - assembly overview
- Removing and installing wind deflector
- Removing and installing sliding roof cover (overview)
- Removing and installing sunroof headliner
- Removing and installing decorative trim
- Removing and installing sealing bellows
- Sun roof panel: removing
- Sun roof panel: adjustment
- Cover joint: replacement
- Adjusting zero position (motor)
- Checking and adjusting zero position (guide plate)
Panorama sliding sunroof (Arvin-Meritor)65 pages
- Tools
- functioning
- Panoramic sliding roof normalisation run
- Assembly overview - panoramic sliding roof
Adjusting height of front and rear glass panel4 pages
Renewing seals for rear glass panel5 pages
Removing and installing the exterior seal3 pages
Removing and installing wind deflector4 pages
- Removing and installing preselector for glass panel and sun blind
- Removing and installing sun blind cross strut
- Assembly overview - assembly frame
Removing and installing tilting mechanism and front glass panel cable3 pages
- Maintenance and care
Panorama roof16 pages
- Panorama roof with glass cover: installation overview
- Glass cover: removing and installing
- Glass cover for the sunroof - adjusting
- Removing and installing interior seal
- Sunroof drive motor - removing and fitting
- Removing and installing frame
- Protection for sunblind roller: removal and installation
- Pane guide: removing and installing
- Front lever: removing and installing
- Sliding guide: removing and installing
- Sliders and control cables: removal and installation
- Sunblind roller: removal and installation
- Blind roller adjustment
- Inner bellows for lateral guide: removing and installing
- Sunblind roller mounts/guide brackets: removal and installation
Sunroof26 pages
- Sunroof with glass cover - assembly overview
Removing and installing glass sunroof cover3 pages
- Adjusting cover joint
- Cover joint: replacement
- Wind deflector: removing
Sunroof drive motor - removing and fitting3 pages
- Sunroof drive motor - adjustment (zero position)
- Removing preselection control for sliding/tilting sunroof
- Parallel movement: Testing
- Parallel movement: Adjustment
- Remove and install frame
- Running guide: removal
Bumper141 pages
Front bumper18 pages
- Front bumper > Week 45.11: Assembly overview
- Front bumper Week 45.11>: Assembly overview
- Upper radiator grille in the bumper trim > Week 45.11: Removing and installing
- Upper radiator grille in the bumper trim > Week 45.11: Removing and installing
- Guide profile: Assembly overview
- Front cross member: Assembly overview
Removing and installing front cross member3 pages
Bumper trim44 pages
- Front bumper trim: Assembly overview
- Front bumper cover, Altea 2009: General assembly overview
Front bumper cover, removing and installing3 pages
Sensor for front parking aid: Removing and installing3 pages
Removing and installing front cross member3 pages
Upper radiator grille in the bumper trim: Removing and installing3 pages
Perimeter of the radiator grille - removal and assembly3 pages
Removing and installing the bottom cover of the bumper trim3 pages
Removing and installing the bottom grille of the bumper trim3 pages
Bottom grille in the bumper cover Altea 2009: Removing and installing3 pages
- Rear bumper trim: Assembly overview
- Rear bumper cover, Altea 2009: General assembly overview
Rear bumper trim, removing and installing3 pages
Rear parking aid sender: removing and installing3 pages
Front bumper trim21 pages
- Front bumper panelling; Ibiza 2002 - Assembly Overview
Front bumper panelling; Ibiza 2002 - remove and install4 pages
- Front bumper panelling; Ibiza 2006 - Assembly Overview
Front bumper panelling; Ibiza 2006 - remove and install4 pages
Bumper lining upper grille: replacing0 pages
- Disassembly
- Installing
Lower grille below bumper panelling - Ibiza 2006 - remove, install3 pages
Side grille below bumper panelling - Ibiza 2006 - remove, install3 pages
- Trim cover for side grille on bumper panelling - Ibiza 2006, replace
Front bumper cover17 pages
- Front bumper lining: Assembly overview
- Bumper cover: front, removing and fitting
- Repairing front bumper cover
Installing bracket for parking aid system5 pages
- Removing and installing centre radiator grille in the bumper trim
- Removing and installing the cover for the headlight washer system
- Removing and installing retainer (rear)
- Bottom middle grille: Removing and installing
- Removing and installing the side grille
- Front bottom spoiler: Removing and installing
Rear bumper panelling16 pages
- Rear bumper panelling - Cordoba - Assembly overview
- Rear bumper panelling; Ibiza 2002 - Assembly Overview
Rear bumper panelling; Ibiza 2002 - remove and install4 pages
- Rear bumper panelling; Ibiza 2006 - Assembly Overview
Rear bumper panelling; Ibiza 2006 - remove and install4 pages
Rear bumper cover15 pages
- Tools
Installing bracket for parking aid system5 pages
- Rear bumper cover add-on parts
- Rear bumper cover substructure parts
- Rear bumper carrier
- Assembly overview - towing bracket
Towing bracket4 pages
Glazing/window mechanism219 pages
Windscreen glass:9 pages
Repair instructions11 pages
Glued windows33 pages
- Windscreen - exploded view
- Rear window Cordoba model - installation overview
Rear window for Cordoba: removing and fitting4 pages
- Windscreen Ibiza model: installation overview
Rear window for Ibiza: removing and installing4 pages
- Side window (2-door vehicles) - installation overview
Side window (2-door models): removing and installing4 pages
- Side window (4-door vehicles) - installation overview
Side window (4-door models): removing and installing4 pages
- Preparing the non-deteriorated glass for installation
Preparing new glass for installation2 pages
- Preparing the bodywork flange for the glass installation
- Installation instructions
- Drying or setting time
- Paintwork damage: reworking
- Cleaning dirt caused by sealing adhesive
Follower stuck windows27 pages
- Tools
- Materials
- Windscreen - exploded view
- Removing windscreen
- Installing windscreen
- Rear window - Assembly overview
- Non-deteriorated windscreen: removing
- Deteriorated rear windscreen: removing
- Rear windscreen: fitting
- Assembly overview - rear side window
- Removing undamaged rear side window
- Removing broken rear side window
- Installing rear side window
- Assembly overview - front side window
- Removing undamaged front side window
- Removing broken front side window
- Installing front side window
- Preparing new window without precoating for glazing
- Preparing body flange for glazing
- Drying or setting time
- Paintwork damage: reworking
- Cleaning off excess adhesive sealing material
Windscreen4 pages
Screwed side window (2-door models)5 pages
Screwed side windows4 pages
Removing and installing screwed side window3 pages
Rear window6 pages
- Assembly overview - rear window
Removing and installing rear window4 pages
Windows in front doors12 pages
- Front door window - Assembly overview
- Front door window - removing and assembly
- Synchronisation and storage of window course
- One-touch up and down function: Putting into operation
- Window shaft seal on outside of front door: removing and installing
- Window shaft seal on inside of front door: removing and installing
- Window guide on front door: removing and installing
- Power window motor in front door: removing and installing
- Power window lift in front door: removing and installing
- Window lift mechanism in front door: removing and installing
- Removing and installing front door unit sub-frame
Front door window10 pages
- Front door window - Assembly overview
- Front door window - removing and assembly
- Synchronisation and storage of window course
- Automatic raising or lowering: Commissioning
- Window well seal outside the front door: Removing and installing
- Window well seal inside the front door: Removing and installing
- Front door window guide: Removing and installing
- Front door electric window motor: Removing and installing
- Front door electric window unit - removing and assembly
Rear door window16 pages
- Tools
- Assembly overview - rear door window
Removing and installing window regulator3 pages
- Inner and outer window slot seals
Rear side windows Exeo ST 20097 pages
- Rear side windows Exeo ST 2009: Assembly overview
Rear side windows Exeo ST 2009: Removing and installing5 pages
Rear door windows10 pages
- Rear door window - Assembly overview
- Rear door window - removing and assembly
- Synchronisation and storage of window course
- Automatic raising or lowering: Commissioning
- Window well seal outside the rear door: Removing and installing
- Window seal inside the rear door: Removing and installing
- Rear door window guide: Removing and installing
- Rear door electric window motor: Removing and installing
- Rear door window lifter unit: Removing and installing
Removing and installing rear window6 pages
Side window6 pages
- Assembly overview - rear side window
Removing and installing rear side window4 pages
Window in rear door10 pages
- Window in rear door: Assembly overview
- Rear door glass: removing and assembly
- Synchronisation and storage of window course
- One-touch up and down function: Putting into operation
- Window shaft seal on outside of rear door: removing and installing
- Window shaft seal on inside of rear door: removing and installing
- Window guide on rear door: removing and installing
- Power window motor in rear door: removing and installing
- Removing and installing rear door unit sub-frame
Behind window Exeo ST 200910 pages
- Rear window Exeo ST 2009: Assembly overview
Rear window Exeo ST 2009: Removing and installing5 pages
- Drying or setting time
- Paintwork damage: reworking
- Cleaning off excess adhesive sealing material
Front door Windows11 pages
- Front door window: assembly overview
- Front door window - removing and assembly
- Synchronisation and storage of window course
- Automatic raising or lowering operation: Commissioning
- Window well seal outside the front door: Removing and installing
- Removing and installing the exterior window well seal with chrome-plated front door trim
- Window well seal inside the front door: Removing and installing
- Front door window guide: Removing and installing
- Front door electric window motor: Removing and installing
- Front door window lifter: Removing and installing
Window channels and seals8 pages
- Removing and installing front window channel
Removing and installing front window slot seal3 pages
Exterior equipment202 pages
Mouldings / trims / extensions3 pages
Roof mouldings11 pages
- Removing and installing roof joint moulding
- Roof joint moulding Exeo ST 2009: Removing and installing
- Decorative roof trim: Removing and installing
- Side roof frame Exeo ST 2009: Assembly overview
Side roof frame Exeo ST 2009: Removing and installing3 pages
Side window trim Exeo ST 2009: Removing and installing3 pages
Exterior mirror16 pages
- Electrically adjusted exterior mirrors - Assembly overview
- Electric outside rear view mirror, Altea 2009: General assembly overview
Electrically adjusted exterior mirror - removing and installing3 pages
- Manually adjusted exterior mirror - Assembly overview
Manually adjusted exterior mirror - removal and installation3 pages
Exterior mirror glass - removal and installation3 pages
Removing and installing mirror housing3 pages
Wheel housing moulding13 pages
Top protective strips11 pages
- Top protective strips - Assembly overview
Engine bonnet strip - removing and installing3 pages
Removing and installing moulded part of the B-pillar3 pages
Removing and installing the door gutter moulding3 pages
Outer rear view mirrors6 pages
- Tailgate, self-adhesive emblem ?SEAT?: removing and installing
Bottom protective strips5 pages
- Skirt mouldings - Assembly overview
Heel cushion moulding: removing and fitting3 pages
Strips and emblems11 pages
- Company emblem, front ?SEAT? > Week 45.11: Removing and installing
- Company emblem, front ?SEAT? Week 45.11 >: Removing and installing
- Tailgate, self-adhesive company emblem ?EXEO?: replace
- Tailgate, self-adhesive company emblem ?EXEO ST?: replace
- Front wing, self-adhesive company emblem ?TDI ST?: remove and apply
- Adhesive mouldings: replacement
- Removing and installing trim cover for sill panel
Removing and installing trim cover for sill panel2 pages
- Removing and installing moulded part of the B-pillar
- Tailgate, self-adhesive emblem of the model version: removing and installing
Lower trim5 pages
- Skirt mouldings - Assembly overview
Heel cushion moulding: removing and fitting3 pages
- Equivalency table depending on applicability
Roof railing10 pages
- Tools
- Assembly overview - roof railing
Removing and installing roof railing retaining bracket4 pages
Wheel housing liner6 pages
Removing and installing wheel housing liner3 pages
Stickers7 pages
Removing and applying the stickers on the front wings3 pages
Removing and applying the tailgate stickers3 pages
Gluing strips and model emblem17 pages
- Gluing strips on side part - installation overview
Removing and installing gluing strip for side part3 pages
Strips and panels25 pages
Gutter moulding5 pages
Front and rear door trim panel5 pages
Front and rear window channel trim strip3 pages
Front and rear window trim strip4 pages
Water mouldings10 pages
Spoiler5 pages
Logos and Glue7 pages
- Removing and applying the stickers on the front wings
- Adhesive logos on the IBIZA 3P tailgate: removal and installation
- Adhesive logos on the IBIZA 5P tailgate: removal and installation
- Adhesive logos on the IBIZA ST tailgate: removal and installation
- Side adhesive logo, Copa: removal and installation
- Tank flap unit, Ibiza ST: removal and installation
Sill panel trim: Assembly overview7 pages
Removing and installing side member trim3 pages
Rocker panel end cover: Removing and installing3 pages
- Conversion table by relevance
- Conversion table by applicability
- Floor trim