Adjustment (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Adjustment (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Adjustment (Cont'd)
ASSEMBLY
Adjustment (Cont'd)
1. Install front side clutch and gear components.
a. Install rear sun gear on transmission case. @ Pay attention to its direction.
SAT974A Install needle bearing on front of front planetary carrier. Apply petroleum jelly to needle bearing. Install needle bearing on rear of front planetary carrier. Apply petroleum jelly to bearing. eee Pay attention to its direction — Black side goes to front.
SAT967A to front.
d. While rotating forward clutch drum clockwise, install front planetary carrier on forward clutch drum.
Z / ) sats69a @ Check that portion A of front planetary carrier protrudes approximately 2 mm (0.08 in) beyond portion B of forward Front planetary carrier clutch assembly.
Portion a
Forward clutch drum
Portion B——= SAT970A
e. Install bearing races on rear of clutch pack. @ Apply petroleum jelly to bearing races. @ Securely engage pawis of bearing race with hole in clutch pack.
~~ _ SAT204B
AT-164
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.