ENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
ENGINE MAINTENANCE
ENGINE MAINTENANCE
Changing Spark Plugs (Cont’d)
2. Remove spark plugs with spark plug wrench. Spark plug: Standard type BKR5E-11 Cold type 16 mm BKR6E-11 (0.63 in) WL} BKR7E-11
SEM294A
3. Check plug gap of each new spark plug. Side electrode Gap: 1.0 - 1.1 mm (0.039 - 0.043 in)
4. Install spark plugs. Reconnect ignition wires according to Nos. indicated on them. Spark plug: (0): 20 - 29 N-m (2.0 - 3.0 kg-m, 14 - 22 ft-lb)
SMA476
Checking Vapor Lines
i "Vacuum line
GIR / “d |
Visually inspect vapor lines for improper attachment and for
1. Purge line \ cracks, damage, loose connections, chafing and deteriora-
Vapor line /
tion. Inspect vacuum relief valve of fuel tank filler cap for clogging, sticking, etc. Refer to EVAPORATIVE EMISSION CONTROL SYSTEM IN- SPECTION in section “EF & EC”’.
SEF750K ~~ “~~~
Checking Valve Clearance
Refer to “CYLINDER HEAD”’ in section “‘EM’’, if engine runs with unusual mechanical noise.
MA-14
Parts & tools for this job For Nissan 240SX
- PARTEngine gasket setSearch: Nissan 240SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.