REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Oil Pump
MO} : Nem (kg-m, ft-lb)
Friction ring Ee ©
TP: Apply A.T.F.
EP) : Apply petroleum jelly.
O-rin GT
ot pin
®) Side seal
Oil pump housing
Control piston Oil pump cover assembly Side seal @) Oil seal ><) TF Vane ring O-ring IaTp in
~P) 16-21 (1.6 - 2.1, , ) 12 - 15) cc(CO —_ High clutch seal ring KT = 1) _ Pivot pin Cam ring Spring seat Cam ring spring Reverse clutch seal ring 29 ® SAT648A DISASSEMBLY Loosen bolts in numerical order and remove oil pump cover.
1.
SAT649A Remove rotor, vane rings and vanes. hm @ Inscribe a mark on back of rotor for identification of fore-aft direction when reassembling rotor. Then remove rotor.
While pushing on cam ring remove pivot pin. o @ Be careful not to scratch oil pump housing.
SAT651A AT-121
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.