Service Tools (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Service Tools (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Service Tools (Cont'd)
PREPARATION
Service Tools (Cont'd)
Charging cylinder The charging cylinder is used to correctly measure the amount of refrigerant to be charged. Pressure gauge Features Vent valve f—— e With the charging cylinder, the operator can measure @ Scale correctly the amount of refrigerant to be charged into the Refrigerant system. or cover a, an container e Change in the refrigerant volume due to a change in temperature and pressure can be supplemented, and. this ensures correct charging of refrigerant.
CAUTION: Connect glass e Never attempt to carry the charging cylinder containing manifold refrigerant. gauge. e Do not put the charging cylinder in a hot place. If the temperature and pressure of the refrigerant in the cylinder increase, the safety valve will be pushed open and the refrigerant will be released into the atmosphere. e Do not expose the cylinder to the direct sunlight. e Do not over-charge the refrigerant so that it exceeds the Inlet valve maximum limit of the cylinder. Outlet valve e Do not charge the cylinder with more refrigerant than is needed. RHA674B
HA-24
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.