ON-VEHICLE INSPECTION - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ON-VEHICLE INSPECTION - Nissan 240SX 1991-1992 Workshop Manual
ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
i S (WS Z Checking Gear Housing Movement heckin
[_f ( SESS
steering on a dry paved surface.
<
1. Check the movement of steering gear housing during stationary
Keel be
@ Apply a force of 49 N (5 kg, 11 Ib) to steering wheel to check
TNT eon = al
the gear housing movement.
Turn off ignition key while checking. Movement of gear housing: eS +2 mm (+0.08 in) or less —
2. If movement exceeds the limit, replace mount insulator after ie a eee confirming proper installation of gear housing clamps. SST105B —s Adjusting Rack Retainer @ Perform this driving test on a flat road. moves in a straight line when
1. Check whether vehicle steering wheel is released. Check whether steering wheel returns to neutral position
2. when steering wheel is released from a slightly turned (ap- prox. 20°) position. . |f any abnormality is found, correct it by resetting adjusting @ screw. SST106B eis
ST-6
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.