EVAPORATIVE EMISSION CONTROL SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › EVAPORATIVE EMISSION CONTROL SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
EVAPORATIVE EMISSION CONTROL SYSTEM
EVAPORATIVE EMISSION CONTROL SYSTEM
Inspection (Cont'd)
FUEL TANK VACUUM RELIEF VALVE
1. Wipe clean valve housing.
2. Suck air through the cap. A slight resistance accompanied by valve clicks indicates that valve is in good mechanical condition. Note also that, by further sucking air, the resis- tance should disappear with valve clicks.
3. If valve is clogged or if no resistance is felt, replace cap as an assembly.
SEC308A
FUEL CHECK VALVE
1. Blow air through connector on fuel tank side. Fuel tank side A considerable resistance should be felt and a portion of air flow should be directed toward the canister.
I Air
2.
Blow air through connector on canister side.
@@ Fue! vapor
Air flow should be smoothly directed toward fuel tank.
oo
3. If fuel check valve is suspected of not properly functioning Ss side
in steps 1 and 2 above, replace it.
=? - SEC309A
EF & EC-174
Parts & tools for this job For Nissan 240SX
- PARTExhaust gasketSearch: Nissan 240SX exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
As an Amazon Associate we earn from qualifying purchases.