TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 4 — Hard to Start or Impossible to Start when the Engine is
G ®
Cold (Cont'd)
¥ 6 |
Ignition wire
CHECK IGNITION SPARK.
N.G. | Check ignition coil, power
1. Disconnect ignition wire from rocker transistor unit and their cover. circuits. (See page EF &
2. Connect a known good spark plug to EC-114.) the ignition wire. Spark plug
3. Place end of spark plug against a ¢ A v suitable ground and crank engine.
4. Check for spark. SEF282G O.K. Vv
CHECK SPARK PLUGS.
N.G. .) Repair or replace spark Remove the spark plugs and check for plug(s). fouling, etc. O.K. v 8
CHECK E.C.U. HARNESS CONNECTOR.
[N.G.,)! Repair or replace. Vv Check the E.C.U. pin terminals for dam- age or poor connection of E.C.U. har- SEF879J| | ness connector. O.K. E) Vv
CHECK E.C.U. POWER SUPPLY AND
N.G. Repair or replace. Vv
GROUND CIRCUIT.
Refer to page EF & EC-96. O.K. 10) Vv
TRY A KNOWN GOOD E.C.U.*
Vv
INSPECTION END
*: E.C.U. may be the cause of a problem, but this is rarely the case.
EF & EC-65
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.