TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 1 — High Idling after
Warm-up Air regulator ol Yes
CHECK AIR REGULATOR.
Check air regulator. (See When pinching the air regulator hose, page EF & EC-144.) does the engine speed drop? No [2 Vv Pinching Yes CHECK INTAKE AiR LEAK. Discover air leak location SEF963K a
1. Select “SELF-LEARNING and repair. CONT” in “ACTIVE TEST” mode. Bactivetest g CL]
2. Clear the self-learning control SELF-LEARN 100% coefficient by touching CONTROL “CLEAR”. =ssS>s== MONITOR ======
3. Does the engine speed drop? —_725rpm
CAS-RPM (REF)
OR
ENG TEMP SEN
84°C
EXH GAS SEN
0.80V . Disconnect exhaust gas sen- 112%
A/F ALPHA
sor harness connectors. | CLEAR |
2. After racing engine at 2,000 rpm under no load for about SEF728K 30 seconds, does the engine speed drop? No DISCONNECT ¥ 3 N.G.
Repair throttle linkage or 101g, 4 —=~ Exhaust gas \t, 2, t,
CHECK THROTTLE LINKAGE.
1. Check that throttle linkage moves sticking of throttle valve. sensor JIN smoothly.
2. Confirm that throttle valve both fully opens and fully closes. O.K. Vv SEF3751
INSPECTION END
r SEF739K
Diagnostic Procedure 2 — Hunting
€>
Yes
CHECK EXHAUST GAS SENSOR.
,| Check exhaust gas sen- \l/ When disconnecting exhaust gas sen- sor. (See page EF & JINN sor harness connector, is the hunting EC-116.) fixed? \* SL EB \\ uw! CU d Y a (Go to @ on next page.) SEF307G
EF & EC-60
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.