TIMING CHAIN - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TIMING CHAIN - Nissan 240SX 1991-1992 Workshop Manual
TIMING CHAIN
TIMING CHAIN
Removal (Cont'd)
16. Remove upper timing chain.
17. Remove idler sprocket bolt.
SEM270D
18. Remove cylinder head with intake manifold, intake manifold Idler shaft collector and exhaust manifold assembly. Cylinder head
19. Remove cylinder head gasket. gasket
Front cover SEM563D e Lower timing chain will not be disengaged from crankshaft sprocket. For this reason, a stopper need not be used. Cast portion of front cover is located on lower side of crankshaft sprocket so lower timing chain need not be disengaged from Front cover idler sprocket.
LOWER TIMING CHAIN
1. Remove upper timing chain. Refer to ’UPPER TIMING CHAIN ‘in’ Removal.
2. Remove oil pan. Refer to ‘““Removal” in ‘“‘OIL PAN’’. Remove oil strainer. Rw Remove the following parts. Power steering drive belt Alternator drive belt Air compressor drive belt Air compressor idler pulley Remove crankshaft pulley. Remove front cover DAneeee SEM263D EM-15
Parts & tools for this job For Nissan 240SX
- PARTTiming belt kitSearch: Nissan 240SX timing belt kit
- TOOLEngine timing tool setSearch: Nissan engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
As an Amazon Associate we earn from qualifying purchases.