PRECAUTIONS FOR REFRIGERANT CONNECTION - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › PRECAUTIONS FOR REFRIGERANT CONNECTION - Nissan 240SX 1991-1992 Workshop Manual
PRECAUTIONS FOR REFRIGERANT CONNECTION
PRECAUTIONS
Do not use manifold gauge whose press point shape is e Valve press point different from that shown. Otherwise, insufficient evacuat- . ing may occur.
RHA919A Do not over-tighten service valve cap. e Donotallow refrigerant to rush out. Otherwise, compressor e oil will be discharged along with refrigerant.
PRECAUTIONS FOR REFRIGERANT CONNECTION
Torque wrench
WARNING: Make sure all refrigerant is discharged into the recycling equipment and the pressure in the system is less than atmo- spheric. Then gradually loosen the discharge side hose fitting and remove it.
CAUTION: When replacing or cleaning refrigerant cycle components, NN observe the following. Do not leave compressor on its side or upside down for e more than 10 minutes, as compressor oil will enter low SHA896A pressure chamber. When connecting tubes, always use a torque wrench and a e@ | back-up wrench.
HA-16
Parts & tools for this job For Nissan 240SX
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Nissan 240SX cabin filter
As an Amazon Associate we earn from qualifying purchases.