DISCHARGING, EVACUATING, CHARGING AND CHECKING - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › DISCHARGING, EVACUATING, CHARGING AND CHECKING - Nissan 240SX 1991-1992 Workshop Manual
DISCHARGING, EVACUATING, CHARGING AND CHECKING
DISCHARGING, EVACUATING, CHARGING AND CHECKING
Charging Refrigerant (Cont'd)
CALCULATING CHARGING AMOUNT OF REFRIGERANT
1. Record the amount of refrigerant in the sight glass before charging.
2. Subtract the required amount of refrigerant (charge quan- tity specified for the vehicle) from the amount of refrigerant recorded in step 1. Charge refrigerant into the system until the remaining value equals to the value indicated on the Referigerant level sight glass. before charging Example: Level in sight glass: 3 Ib 8 oz Specified amount Charge specification (from S.D:S.) 2.0 - 2.4 Ib. of charge Calculate charge quantity into Ib and oz as follows: 1 Ib = 16 oz, Refr igerant level and 0.1 Ib = 1.6 oz, so that 2.0 Ib = 32 0z, 2.4 lb = 32 + (4x after charging
1.6) = 32 + 6.4 = 38.4, round off to 38. Therefore our charge quantity will be between 32 and 38 oz, or 2 Ib 0 oz to 2 Ib 6 oz. Subtract 2 Ib 6 oz from the level in the sight glass (3 Ib 8 oz) = 1 Ib 2 oz. This will be our ending point.
RHA681B lf a flow meter is not available, the amount of charged refriger- 2 3016 ant also can be determined by subtracting the weight of the canister measured after charging from its weight measured before charging.
0000
RHA602B
HA-32
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.