TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Control Linkage Adjustment (Cont'd)
INTAKE DOOR
1. Connect intake door motor harness connector before installing
Door LES
on intake door motor. Turn ignition switch to ON. Turn REC switch ON. \ SY Install intake door lever and intake door motor. \ a — Z Intake door motor Set intake door rod in REC and secure door rod to holder. \ WW re Check that intake door operates properly when REC switch is Ooarwn oS turned ON and OFF. , SQ i} as Intake door lever
RHA569C
MAX. COLD DOOR
1. Connect max. cold door motor harness connector before installing max. cold door motor. Turn ignition switch to ACC. WONM Turn DEF switch ON. | Max. cold door Set temperature control lever to full hot position. —\ \ motor \ NJ \ FR ao a Install max. cold door motor on heater unit. fil | * t Attach max. cold door lever to rod holder. Oe Check that max. cold door operates properly when mode NOOR _——> kL yy; switch is turned to VENT and DEF. tel)
door lever = ley’
. Max. cold | | —— = Pull ~—— a ———— FF
(&) : Full hot position
RHAS 14C
HA-96
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.