Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

ENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › ENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual

ENGINE MAINTENANCE

ENGINE MAINTENANCE

Checking Drive Belts

HICAS pump rear lock nut (with SUPER HICAS) (0) 16 - 19 \_ ©) 20 - 23 (2.0 - 2.3, (1.6 - 1.9, 14 - 17) 12 - 14) \ djusting bolt 3 Power steering AKO oil pump

Adjusting 49 16 - 2 (1.6 - 1.9, bolt 12 - 14)

Air conditioner P Alternator compressor Idler pulley

Vv : Check point Adjusting bolt (OC): N-m (kg-m, ft-lb) So / = SMA387C

1. Inspect for cracks, fraying, wear or oil adhesion. If neces- sary, replace with a new one.

2. Inspect drive belt deflections by pushing on the belt midway between pulleys. Adjust if belt deflections exceed the limit. Belt deflection: Inspect drive belt deflections when engine is cold. Unit: mm (in)

Used belt deflectionDeflection
LimitDeflection after adjustmentof new belt
adjustmentnew belt
Alternator11 (0.43)7-8 (0.28 - 0.31)6-7 (0.24 - 0.28)
i iti Air conditioner12 (0.47)7.5 - 8.5 5-86.5 - 7. 5
compressor(0.295 - 0.335)(0.256 - 0.295)
Power steering oil
pump
Without SUPER13 (0.51)7.5 -8.56.5 - 7.5
HICAS,(0.295 - 0.335)(0.256 - 0.295)
With SUPER9 (0.35)6.5 - 7.55.5 - 6.5
HICAS(0.256 - 0.295)(0.217 - 0.256)
Applied pushing force98 N (10 kg, 22 Ib)

MA-9

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.