ASSEMBLY (Model R200) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ASSEMBLY (Model R200) - Nissan 240SX 1991-1992 Workshop Manual
ASSEMBLY (Model R200)
ASSEMBLY (Model R200)
Differential Case (Cont’d)
6. Apply locking sealant to ring gear bolts, and install them.
Tighten bolts in a criss-cross fashion, lightly tapping bolt
head with a hammer.
SPD554
7. Press-fit side bearing inner cones on differential case with Tool. Tool number: (A) KV38100300 (J25523) ST33061000 (J8107-2)
PD353 Differential Carrier
1. Press-fit front and rear bearing outer races with Tools. Tool number: Pinion rear bearing outer race (@) $T30611000 (J25742-1) $T30701000 (J25742-2) © $T30613000 (J25742-3)
2. Select pinion bearing adjusting washer and drive pinion bearing spacer, referring to Adjustment.
Pinion front bearing outer race
SPD679
3. Install drive pinion height adjusting washer in drive pinion, Adjusting and press-fit pinion rear bearing inner cone in it, using press Press washer and Tool. Tool number: ST30901000 ( — _ )
SPD377 PD-26
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.