TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 26 (Cont’d)
% MONITOR x NO FAIL [_]
INSPECTION START
CAR SPEED SEN
—-10mph
N.G.
CHECK SPEEDOMETER FUNC-
Check vehicle speed sensor and Vv circuit. TION. Make sure that speedometer (Refer to EL section.) functions properly. [ RECORD | fox. SEF995K N.G.
CHECK INPUT SIGNAL CIRCUIT.
Check the following. e Harness connectors@)), (#53) = 1) Read vehicle speed
e Harness connectors
, 2) sensor signal in
“DATA MONITOR”
e Harness continuity between 2d AE) mode with CONSULT. E.C.U. and combination meter CONSULT value If N.G., repair harness or con- should be the same as nectors.
IL CANIT [ol CONNECTOR }
the speedometer indi- | 32 cation. OR 1) Turn ignition switch =), “OFF”. ( = cc 2) Disconnect E.C.U. har- ness connector and combination meter har- ness connector. 3) Check harness conti- nuity between E.C.U. terminal 62 and termi- [ vemos | nal @ (Models without [mn [kt Cit head-up display), ) uU (Models with head-up display). Continuity should exist. MEF690A O.K. Vv Check E.C.U. pin terminals for damage or the connection of E.C.U. harness connector.
Perform FINAL CHECK by the following procedure after repair
is completed.
FINAL CHECK
Start engine.
‘ N.G. Perform self-diagnosis (Mode I). Recheck E.C.U. pin terminals for damage or the connection of O.K. E.C.U. harness connector.
Vv
INSPECTION END
EF & EC-113
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.