SYSTEM DESCRIPTION — Push Control - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › SYSTEM DESCRIPTION — Push Control - Nissan 240SX 1991-1992 Workshop Manual
SYSTEM DESCRIPTION — Push Control
SYSTEM DESCRIPTION — Push Control
Overhaul — Push control unit assembly (Cont'd)
3. Remove control base. Undo hook at each end of control box and remove control base from control box by moving it in direction indicated by arrow.
Flat-bladed screwdriver RHA389A
4. Remove fan switch. ~N \\__
Small flat-bladed
Vv. screwdriver ee JSP base s22,)
4 SS RHA3SS0A Fan switch
5. Remove illumination bulb. Mlumination oe — iA! Control me
Sos
Control box
6. Remove control knobs. Wrap finisher with a cloth and remove knobs using pliers or similar tool. Be careful not to scratch finisher’s surface.
7. Remove control case.
8. Remove illumination plate. Be careful not to scratch control amp. when removing illumina- tion plate.
9. Remove finisher plate.
10. Remove control amp. Be careful not to damage substrate when removing.
11. Disconnect temperature control cable.
12. Installation is in reverse order of removal.
HA-100
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.