TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Self-diagnosis — Mode II (Exhaust gas sensor
monitor) DESCRIPTION In this mode, the CHECK ENGINE LIGHT and RED L.E.D. display the condition of the fuel mixture (lean or rich) which is moni- tored by the exhaust gas sensor.
| CHECK ENGINE LIGHT | Fuel mixture condition in the exhaust | Air fuel ratio feedback |
|---|---|---|
| and RED L.E.D. | gas | control condition |
| ON | Lean | |
| OFF | Rich | Closed loop control |
| *Remains ON or OFF | Any condition | Open loop control |
*: Maintains conditions just before switching to open loop.
HOW TO CHECK EXHAUST GAS SENSOR
1. Set Mode II. (Refer to “HOW TO SWITCH MODES’’.)
2. Start engine and warm it up until engine coolant tempera- ture indicator points to the middle of the gauge.
3. Run engine at about 2,000 rpm for about 2 minutes under no-load conditions. Make sure RED L.E.D. or CHECK ENGINE LIGHT goes ON and OFF more than 5 times every 10 seconds; measured at 2,000 rpm under no-load.
EF & EC-45
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.