TIMING CHAIN - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TIMING CHAIN - Nissan 240SX 1991-1992 Workshop Manual
TIMING CHAIN
TIMING CHAIN
Removal (Cont'd)
9. Remove rocker cover.
10. Remove distributor.
@ Loosen in numerical order. SEM264D
11. Remove cam sprocket.
12. Remove cam brackets and camshafts. e These parts should be reassembled in their original posi- tions.
Exhaust camshaft on Loosen in numerical order. Engine front Loosen exhaust camshaft bracket in the same procedure. SEM271D
13. Loosen cylinder head bolts. Engine Head warpage or cracking could result from removing in front incorrect order. Cylinder head bolts should be loosened in two or three steps.
Loosen in numerical order. SEM274D
14. Remove cam sprocket cover Front cover e Upper timing chain will not be disengaged from idler sprocket. For this reason, a stopper need not be used. Cast portion of cam sprocket cover is located on lower side of idler sprocket so upper timing chain need not be disengaged from idler sprocket.
15. Remove upper chain tensioner and upper chain guides.
Stopper SEM619D EM-14
Parts & tools for this job For Nissan 240SX
- PARTTiming belt kitSearch: Nissan 240SX timing belt kit
- TOOLEngine timing tool setSearch: Nissan engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
As an Amazon Associate we earn from qualifying purchases.