HYDRAULIC CLUTCH CONTROL - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › HYDRAULIC CLUTCH CONTROL - Nissan 240SX 1991-1992 Workshop Manual
HYDRAULIC CLUTCH CONTROL
HYDRAULIC CLUTCH CONTROL
Clutch Master Cylinder
(® Piston cup
Return spri spring Piston assembly
Reservoir cap
Reservoir
Reservoir band Cylinder body (R) Rubbing surface to piston 8-11 assembly (0.8 - 1.1,
5.8 - 8.0) Dust cover ® Rubbing surface to push rod
| stopper ring &
Packing @ Apply brake fluid when assembling. -—- Stopper Valve stopper
Push rod
(CJ 1.5 - 2.9 (0.15 - 0.3, 1.1 - 2.2)
(R) Contact surface to piston assembly
@ Remove this stopper, when
removing piston and return spring. (R) : Apply rubber grease.
(9): Nem (kg-m, ft-lb)
SCL348
DISASSEMBLY AND ASSEMBLY
@ Push piston into cylinder body with screwdriver when removing and installing valve stopper.
@ Align groove of piston assembly and valve stopper when installing valve stopper. @ Check direction of piston cups. (Sj. S| ) - —I) Groove iS}
SCL214
CL-7
Parts & tools for this job For Nissan 240SX
- PARTClutch kitSearch: Nissan 240SX clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Nissan 240SX manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.