ASSEMBLY (Model R200V) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ASSEMBLY (Model R200V) - Nissan 240SX 1991-1992 Workshop Manual
ASSEMBLY (Model R200V)
ASSEMBLY (Model R200V)
Differential Case (Cont'd)
2. Place differential case on ring gear.
3. Apply locking sealant to ring gear bolts, and install them. Tighten bolts in a criss-cross fashion, lightly tapping bolt head with a hammer.
SPD554
4. Press-fit side bearing inner cones on differential case with Tool. Tool number: @® KV38100300 (J25523) ® $T33061000 (J8107-2)
PD353
Differential Carrier
1. Press-fit front and rear bearing outer races with Tools. Pinion rear Tool number: bearing outer race (@) $T30611000 (J25742-1) Sy | /RR $T30701000 (J25742-2)
ial RRRIL
© $T30613000 (J25742-3) tC | w Ye
2. Select pinion bearing adjusting washer and drive pinion bearing
spacer, referring to ADJUSTMENT.
Pinion front bearing outer race vi /x \y © ©
C A)
SPD679
3. Install selected drive pinion height adjusting washer in Adjusting drive pinion, and press-fit pinion rear bearing inner cone in washer it, using press and Tool. Tool number: ST30901000 ( — )
SPD377 PD-44
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.