TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
A/T Shift Lock System (Cont'd)
@€> N.G. Check key switch. AH
CHECK INPUT SIGNAL
(Refer to “COMPONENT
(KEY SWITCH).
CHECK”.)
1. Reconnect control unit har- Control unit Y/R terminal ness connector.
2. Cima When ignition key cannot be SAT985D removed, even if selector lever @€ is in “P’’ position, use emergency lever.
3. Check voltage between con- a eeec) trol unit terminal () and ground. Control unit Y/R OV terminal OK, N.G. Check the following items: Gs) SAT985D
1. Harness continuity between control unit harness terminal () and key switch harness
2. Check voltage between con-
terminal @.
trol unit harness terminal (®)
2. Harness continuity between and ground. key switch harness terminal Battery voltage should exist. (@) and fuse O.K.
3. Key switch (Refer to ‘“COM- Vv
PONENT CHECK”.)
CHECK INPUT SIGNAL
(DETENTION SWITCH—KEY).
1. N.G, SAT627C Check detention switch—key. M0) (Refer to “COMPONENT CHECK” .) ES T [J 2. Set selector lever to “P” position and release selector lever button.
3. Check voltage between control unit harness ter- Control unit LW I< terminal minal (2 and ground. OV O.K. SAT994D
Vv ©) AT-90
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.