TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 18 — Detonation
Blow-by hose Yes Discover air leak location
CHECK FOR INTAKE AIR LEAK.
Vv and repair. When pinching blow-by hose (lowering the blow-by air supply), does the en- gine rpm rise? No ‘ No SEF300G
CHECK E.G.R. OPERATION.
Check E.G.R. control Vv
1. Apply vacuum directly to the E.G.R. valve for sticking. E.G.R. control valve using a handy vacuum control valve pump.
2. Check to see that the engine runs rough or dies. Yes ¥ N.G.
Check solenoid valve and Vv circuit. VALVE. —\
CHECK E.G.R. CONTROL SOLENOID
1. Select “E.G.R. CONT SOL SEF820F VALVE” in “ACTIVE TEST”’ mode.
2. Turn E.G.R. and canister con-
Mactivetest gm
[] trol solenoid valve ON and
EGR CONT SoL/v ON
OFF.
3. Check operating sound. MONITOR OR
CAS-RPM (REF)
675rpm . Disconnect E.G.R. and canis- ter control solenoid valve har- ness connector.
2. Supply E.G.R. and canister Lonorr || OFF | control solenoid valve termi- SEF734K nals with battery current and check operating sound. O.K. 4 ¥ N.G. p| Repair or replace.
CHECK VACUUM HOSES.
Check the following vacuum hoses for clogging, cracks and poor connection. a) Vacuum hose between E.G.R. con- BATTERY trol valve and E.G.R. and canister control solenoid valve. b) Vacuum hose between E.G.R. and SEF991K canister control solenoid valve and throttle chamber port. c) Vacuum hose between E.G.R. and canister control solenoid valve and air duct. rs
(Go to ® on next page.)
EF & EC-90
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.