TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Electrical Components Inspection (Cont'd)
INHIBITOR SWITCH
Check continuity between terminals @) and (2) and between
1. terminals @) and @), 6), ©, @, ®, @ while moving selector lever through each range.
| Terminal No. | O}@!}@ | @|)]@| | OQ] | OO] | @ | @) |
|---|---|---|---|---|---|---|
| Terminal No. Lever position | O}@!}@|)]@| | OQ] | OO] | @ | @) | |
| P | O---O | O-O | ||||
| R | O | O | ||||
| N | O—-O | © | O | |||
| D | O | O. | ||||
| 2 | © | |||||
| 1 | O | O |
‘ 4. SS ] Inhibitor switch |
SAT843B If N.G., check again with manual control linkage discon-
2. nected from manual shaft of A/T assembly. — Refer to step
1. If O.K. on step 2, adjust manual control linkage. — Refer to
3.
‘“ON-VEHICLE SERVICE”.
If N.G. on step 2, remove inhibitor switch from A/T and
4. check continuity of inhibitor switch terminal. — Refer to step 1. lf O.K. on step 4, adjust inhibitor switch. — Refer to “ON-
5.
VEHICLE SERVICE”.
If N.G. on step 4, replace inhibitor switch.
6.
SAT851B
REVOLUTION SENSOR
. an
e or removal and installation, refer to ““ON-VEHICLE SERV-
e Check resistance between terminals (), @) and @).
O? Teco
| eae \
| Terminal No. ® @ | Resistance 500 - 6502 ontinuity |
|---|---|
| ® @ 2) 3) ® @) | No continuity No continuity |
SAT844B Vi
AT-80
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.