TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
A/T Shift Lock System (Cont'd)
DIAGNOSTIC PROCEDURE 1
(es) CONNECT E> 24 SYMPTOM: Selector lever cannot be moved from ‘P” range when applying brake pedal or can be moved when releasing brake pedal. oy Selector lever can be moved from “P’’ range when key is removed from key cylinder. om | ;
Control unit
CHECK POWER SOURCE.
NG. Check the following items: terminal
1.
1. Harness continuity between SAT982D (tr a battery and control unit harness terminal (@)
2. Fuse
2. Check voltage between con- CONNECT & trol unit harness terminals € >
(4) and ground.
Battery voltage should exist. ; 9 /L 2 © 6 ARK, ; NG Control unit Check the following items:
1.
1. Harness continuity between (&} battery and control unit harness terminal 6) SAT983D Fuse N
2. Check voltage between con- DISCONNECT trol unit harness terminal ©)
3. Ignition switch €: ) HS.
and ground.
OV O 8
| Control unit
OFF wo \\ terminal
4. Check voltage between con- le y, . . trol unit harness terminal 6) and ground. SAToOB4D Battery voltage should exist. O.K. N.G.
CHECK GROUND CIRCUIT
Repair harness or connector. v
FOR CONTROL UNIT.
1. ®,
2. Disconnect control unit harness connector.
3. Check continuity between control unit harness terminal (Q) and ground. Continuity should exist. O.K.
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.