TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Preliminary Check
PROCEDURE 1
C ) START
‘N v Turn ignition switch and all other electrical switches “OFF”, and close door.
N y Disconnect negative cable from battery.
Open door.
. y Move shoulder belt buckle to center (not rear lock position and not front stop position) by wrench supplied in tool bag or equivalent.
Close door.
Connect battery cable.
STEP 1 N y : : Yes
Does shoulder belt buckle move frontwards?
»|
Go to Diagnostic Procedure 2.
(See page BF-47.) No Vv Open door.
STEP 2 Vv No Turn ignition switch “ON”. Does shoulder belt buckle move frontwards? v Yes Vv STEP 4 Vv
Close door, and turn ignition switch “ON”.
Does shoulder belt buckle move rearwards?
[- Yes No STEP 3 v ‘ Does shoulder belt buckle move rearwards? >| Close door. Yes No
Does shoulder belt buckle move rearwards?
C END Yes No | v v Go to Diagnostic Procedure 4. Go to PROCEDURE 2 of Main Power Supply and Ground Circuit Check. (See page BF-40.) (See page BF-49.) Then go to Diagnostic Procedure 1. (See page BF-44.) v Go to Diagnostic Procedure 3. (See page BF-48.)
BF-38
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.