WINDSHIELD AND WINDOWS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › WINDSHIELD AND WINDOWS - Nissan 240SX 1991-1992 Workshop Manual
WINDSHIELD AND WINDOWS
WINDSHIELD AND WINDOWS
Drying Time for Sealant Reference: Time required for sealant to dry to desired hardness. Unit: days
| Relative humidity | |||
|---|---|---|---|
| % Temperature °C (°F) | 90 | 50 | 25 |
| Temperature °C (°F) | |||
| 40 (104) | 1.5 | 2.5 | 5.0 |
| 25 (77) | 2.5 | 4.0 | 7.5 |
| 5 (41) | 5.0 | 13.0 | 20.5 |
CAUTION: Advise the user of the fact that vehicle should not be driven on rough roads or surfaces until sealant has properly vulcanized.
Repairing Water Leaks for Windshield and
Back Window (Coupe)/Back Door Window
(Fastback) Leaks can be repaired without removing and reinstalling glass. If water is leaking between caulking material and body or between glass and caulking material, determine the extent of the leak by applying water while pushing glass outward. To stop the leak, apply primer and then sealant to the leak point.
Flat stick Trimming
Work into joints,
Polysulphide or polyurethane sealant SBF543B Afterwards, install molding securely.
BF-78
Parts & tools for this job For Nissan 240SX
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
As an Amazon Associate we earn from qualifying purchases.